Home  >  Farm Machinery  >  Farm Machinery  >  Cultivators

1. agriculural disc plough, 2. three-point mounted linkage, 3.Working power(HP):18-80, 4. long service life, 5.6 available modes - details see: https://www.machineto.com/1lyq-series-tractor-mounted-farming-disc-plough-10180913

1LYQ Series Tractor Mounted Farming Disc Plough

Introduction

1. The disc plough is directly mounted to the Tractors.

2. The plough is a hydraulically operated basic implement for the preparation of land.

3. It is available in a basic 2, 3, 4, 5- furrow version with the kit for converting ploughs with even more furrows.

4. The Disc Plough is especially useful in hard and dry trashy, stumply land conditions and in soils where scouring is a major

problem.

5. Heavy-duty frame has high trash clearance allowing the plough to operate under heavy crop residual.

6. Being fully mounted and comparatively lighter in weight results lighter draft as compared to equivalent trailed plough where more power is required to operate and consequently higher operating costs

Advantages

1. Only partial inversion of the soil so that plant residue is left on the surface, thus reducing the erosion risk and water losses by evaporation.

2. Mixing action on loose soils.

3. Rolls over obstacles so that hardly any breakage occurs.

4. Lower risk of choking (sugarcane, cotton, maize).

5. Fewer problems with sticky soils.

6. Hardly any smearing of the furrow bottom (plough sole).

7. The wear is spread over the entire circumference of the disc (2m of cutting edge on discs with a diameter of 65cm).

8. The discs are selfsharpening.

9. Easier adjustment.

Specification

Model	1LYQ-220	1LYQ-320	1LY(T)-325	1LY(T)-425	1LY(T)-525	1LY(T)-625
Overall dimensions(L*W*H) cm	133*76*110	179*79*115	221*112*143	275*124*143	329*136*143	383*150*143
Working width (m)	0.4	0.6	0.75	1.0	1.25	1.5
Working depth (mm)	20	20	25	25	25	25
Disc diameter(mm)	500	500(510)	650(710)	650(710)	650(710)	650(710)
Qty of disc	2	3	3	4	5	6
Weight(kg)	160	180	480	520	550	590
Linkage	ⅠType three-point mounted	ⅠType three-point mounted	ⅡType three-point mounted	ⅡType three-point mounted	ⅡType three-point mounted	ⅡType three-point mounted
Ground clearance(mm)	≥200	≥200	≥200	≥200	≥200	≥200
Theoretical work efficiency (ha/h)	0.21	0.3	0.375	0.5	0.63	0.75
Match power (hp)	18-20	25-30	50-55	65-80	120	≥80

More Pictures