Home  >  Construction Machinery  >  Engineering & Construction Machinery  >  Other Construction Machinery

18T Non-dig drilling rig, 1.used for cables and pipelines laying, 2.best quality,good service., 3.popular in Indian - details see: https://www.machineto.com/18t-non-dig-drilling-rig-in-horizontal-direction-10098922

18T Non-dig drilling rig

1.Main Technique Parameters:

Rig Weight	8T
Size (L*W*H mm)	6.6*2.16*2.3m
Diesel engine	113kw/2200rpm
Max. Torque	6000N m
Max. Push & Pull Force	180KN
Max. Rotary Speed	23m/min
Max. Rotary Speed	210r/min
Max. Mud Flow	250L/min
Max. Mud Pressure	8Mpa
Diameter of Expanding Apertur	750mm(ground condition depended)
Max. Work Distance	300m(ground condition depended)
Drill Entry Angle	10-20°
Max. Climbing Gradient	18°
Drill rod	60*3000mm
Reamer	200;300;400;500;600;700

2.Construction process

1) drill the pilot hole(use locating system together with our drilling rig)

2) Expand the pilot hole with reamer

3) pull the pipes/cables to the hole

4.Advantages of GT180-L

1. For the push-pull method, our rig use Gear and pinion instead of cycle Chain to prevent power loosing during feeding and pulll back. It can also eansure high work efficiency and good performance

2. .The layout of the oil tube is reasonable and clear, which ensure the machine stable and the project safty

3. The moving of the power head makes the loading and unloading of driling pile more conviently and also can effectivly protect the screw thread of the dill rod ;

4.The walking system controlled by wire to ensure the safety during walking;

5.Comparing with the traditional hydraulic system, our advanced hydraulic system improve15-20% work efficiency, reduces 50% heat loss and saves 15-20% energy;

6. The main components of the rig (engine; motor; reducer and so on) are imported from The American and European contries.

5. Operation handles

5.