(16x2500mm) Mechanical Plate Rolling Machine, Three rollers bending machine

Mechanical Plate Rolling Machine|Three rollers bending machine, veneer reeling machine, 16x2500 mm sheet steel, In stock!! - details see: https://www.machineto.com/16x2500mm-mechanical-plate-rolling-machine-three-rollers-bending-machine-10123584

Condition:New	Place of Origin:Anhui China (Mainland)	Brand Name:SXZG	Model Number:W11-16x2500
Machine Type:Beading Machine	Raw Material:Sheet / Plate Rolling	Material / Metal Processed:Carbon Steel	Power:Cnc
Automation:Automatic	Extra Services:Machining	Certification:ISO 9001:2000	After-sales Service Provided:Engineers available to service machinery overseas
Colors:Optional

(16x2500mm) Mechanical Plate Rolling Machine, Three rollers bending machine

contact supplier for (16x2500mm) Mechanical Plate Rolling Machine, Three rollers bending machine

>>>> Technical parameters:



















No	Name	Unit	Specification
1	Model	mm	W11-16x2500
2	Max thickness of coiled plate	mm	16
3	Max width of coiled plate	mm	2500
4	Yielding limit of sheet metal	Mpa	245
5	Diameter of upper roller	mm	280
6	Diameter of the lower roller	mm	220
7	Distance between of lower roller	mm	360
8	Loaded with minimum diameter	mm	750
9	Bending speed	m/min	6
10	Main motor power	kw	15
11	Dimension(LxWxH)	mm	5050x1400x1700
12	Weight of machine	Tons	5.8

>>>> Structure and transmission :

1.Rollersare the most important part of the equipment. The material is fine forging. After rough shaping, they are quenched and tempered into HB240~280. Then finish machining. Finally roll surface hardening into HRC40~45.

2. There areracksboth on the left and right. They are Steel welding components. They are handled through eliminating the welding stress. Bottom roller bearing is installed into the racks. Worm and spiral are installed beneath. Top roller does vertical motion up and down through the rotation of the nut of worm.

3. All thereducersare cylindrical gear reducers. They are installed into the working base.

4. It is installed on the side of thereducer to balance the top roller while discharging.

5.Working base: Help to install and lift. The base is made by welding shaped steel and steel plate and is handled through eliminating the welding stress.

6.Electrical part:Three-phase AC power 380V/50Hz.The bottom roller is driven by a main motor and the top roller is driven by the associate moter. The controlling electrical parts are all installed into the control box. So that the whole machine can be protected from Short-circuit and being heated.

>>>> Products show:

W11-16x2500 Mechanical Plate Rolling Machine, Three rollers bending machine