Home  >  Construction Machinery  >  Engineering & Construction Machinery  >  Concrete Machinery  >  Concrete Truck

10m3 Sinotruk 6*4 concrete mixer truck, 1.ISO9001-2008Certification, 2.Drive wheel:6*4, 3 Factory sale direcly, 4 Euro3 - details see: https://www.machineto.com/10m3-sinotruk-6-4-concrete-mixer-truck-10094230

10m3 Sinotruk 6*4 concrete mixer truck

1. Brief Introduction

Specialconcrete transport trucks(in–transit mixers) are made to transport and mix concrete up to the construction site. They can be charged with dry materials and water, with the mixing occurring during transport. With this process, the material has already been mixing. The concrete mixing transport truck maintains the material's liquid state through agitation, or turning of the drum, until delivery. The interior of the drum on a concrete mixing truck is fitted with a spiral blade. In one rotational direction, the concrete is pushed deeper into the drum. This is the direction the drum is rotated while the concrete is being transported to the building site. This is known as "charging" the mixer. When the drum rotates in the other direction, the Archimedes' screw-type arrangement "discharges", or forces the concrete out of the drum. From there it may go onto chutes to guide the viscous concrete directly to the job site. If the truck cannot get close enough to the site to use the chutes, the concrete may be discharged into a concrete pump, connected to a flexible hose, or onto a conveyor belt which can be extended some distance (typically ten or more metres). A pump provides the means to move the material to precise locations, multi-floor buildings, and other distance prohibitive locations. The drum is traditionally made of steel but on some newer trucks as a weight reduction measure, fibreglass has been used.

Concrete mixers are equipped with anywhere from two axles and up. Four, five and six axle trucks are the most common with the number being determined by the load and local legislation governing allowable loads on the road. These are necessary to distribute the load evenly and allow operation on weight restricted roads and to reduce wear and tear on normal roads. A two or three axle truck during the winter when road weight limits are reduced has no usable payload in many jurisdictions. Other areas may require expensive permits to operate. Additional axles other than those used for steering ("steers") or drivetrain ("drives") may be installed between the steers and drives or behind the drives. Mixers commonly will have multiple steering axles as well, which generally result in very large turning radii. To facilitate maneuvering the additional axles may be "lift axles" which allows them to be raised off the ground so that they do not scrub (get dragged sideways across the ground) on tight turns, or increase the vehicle's turning radius. Axles installed behind the drives are known as "tag axles" or "booster axles", and are often equipped to turn opposite to the steering axle to reduce scrubbing and automatically lift when the truck is put into a reverse gear.

2. structure drawing

3. Technical Specification

Name vehicles	10m3 Sino hydraulic concrete mixer
Vehicle models	ZZ5251GJBN3841C
English brand	GOLD PRINCE
Engine Model	WD615.95(C) WD615.95E	Engine power(kw)	247
	WD615.92(C) WD615.92E		196
	WD615.93(C) WD615.93E		213
Engine capacity	9726 9726 9726	Engine manufacturers	SINOTRUK
Dimensions(mm)	8935×2490×3875	Combustion types	Diesel
	8835×2490×3775
	8835×2490×3875
The total mass(Kg)	25000	Agitating capacity	8CBM, 9CBM,10CBM
Kerb weight	12890	Rated contained mass	11980
Approach / departure angle (°)	20.5/22	Suspended before / after hanging(mm)	1320/2515
Shaft number	3	Maximum speed(km/h)	74
Oil Consumption		Spring few films	12/12,10/12
Several tire	10	Tire specifications	11.00-20 11.00R20 12.00-20 12.00R20

4. Picture Show

Different Concrete mixer truck

5.Payment terms and delivery

Delivery date: 20-25 business days

Payment terms: pay 30% of contract value as prepayment after sign contract and pay the rest after the goods finished.

Packing: nude, covered with wax, small type can be put into 20'GP or 40'GP, big type can be carried by bulk carriers or ro-ro ship or according to your requirements

6. Our Factory & Certificate

7.Remark

The above information is just for your reference. We can manufacture the trucks as per your request and we can fulfill all your demands.

Should you have any other questions or need any other information, pls feel free to contact me. It would be my great pleasure to be on your service. Pls check my contact information as following