Home  >  Construction Machinery  >  Building Material Making Machinery Parts

100,000Autoclaved Aerated Concrete block plant, 1.World-class quality, 2.Computer control, 3.ISO 9001:2000:CE, 4.Hydraulic - details see: https://www.machineto.com/100-000autoclaved-aerated-concrete-block-plant-10078615

100,000AutoclavedAerated Concrete block plant

100,000Autoclave For Autoclaved Aerated Concrete block plant

1.For the hydraulic system ,we are adopted imported electro-hydraulic double proportional control valves . the pressures and speeds can be adjusted according to requirements when working,saving energy,the impacts to machanical section reduced and service life of the brick machine prolonged.

2.For vibrating section.the frequency conversion control technology is used, force can be adjusted automatically.

3.For transmission section,the direct shaft transmission of a single motor is adoopted, a remote control system is used , saved manpower and increase feeiciency.

4.Computercontrol system, the latest technology is adopted,only with a simple training course,worker can operate it easily, waring faults and dsiplaying fault location ,eliminate the problems within a very short time for recovering the production.

5.Produce light weight block,concrete block ,solid block and porous block.

100,000Thchnological Flow of Production Autoclave Aerated Concrete block plant

1. First,dose and match measured raw materials

2. After distributing,feed raw material into pouring mixer to make slurry

3. Through thoroughly mixing,the slurry is poured to mould

4. After pre-curing under a certain temperture and time,the block would reach a certain hardness prepare for cutting

5. Tilting hoister would turn over 90 degree of mould

6. Then open the mould and separate it from block,and take the block woth side plate ti cutting cart

7. The blocks then be cut through the cutter firstly of two vertical sides of block

8. Secondly the horizontal cutting

9. Finally the vertical cutting

10. After cutting,the block is hanged to trolly with side plate by semi-finished product hoister

11. Organizing the cut blocks and put them into autoclave

12. Hardending the blocks under certain temperture and pressure

13. Take finished products out of autoclave

14. The finished product hoister take the finished product to stock shield

15. Packed for loading

16. The side plate return back by side plate roller

17. Side plate would be organized with open mould

18. Clean the mould and preparing for next pouring

19. Steel bars processing line for slab production