Home  >  Metal Processing Machinery  >  Machine Tools Accessory  >  Machine Tool Spindle

woodworking machine spindle, 1.Hnz-15, 2 200v,6.5A, 3.with CE ISO - details see: https://www.machineto.com/1-5-2-2-3kw-spindle-with-high-quality-10154751

1.5/2.2/3kw spindle with high quality

model	Power	Outside diameter Size	Cutter head Diameter	Bearing Number	Rated Frequency	Rated Voltage	Rated Rotational speed
M80A	1.5KW	80*237	ER-16	4	400	220V	24000

High speed motor

High speed motorto Introduction:
High speed motorUsually refers to the speed of more than 10000r/min motor. It has the following advantages: one is due to the high speed, so the motor has high power density, and the volume is far less than the power of the electric motor, can save material. The two is connected with the original motivation, the abolition of the traditional mechanism, high transmission efficiency, low noise. The three is due to the high speed motor, small moment of inertia, so quick dynamic response.
High speed motor repair method:
High speed motorFor high-speed motor, general motor repair for the general method of repair, may not be able to fix, repair, may not be used for a long time. According to the practical experience from home and abroad. Introduce the speed of 2O000RPM high speed motor with low-speed motor repair method of different general.
l To determine whether the need for removing the armature Observation of the operation of the motor carbon brush and the commutator would generate sparks, sparks degree, ( I ) is no spark. Description of the carbon brush and the commutator is normal, no need of repair;(2)There were only 2~4 tiny spark. Then carefully observed the surface of the commutator is flat. In most cases can not repair;(3)In addition to R 4 to F tiny spark, and another 1 to 3 large spark, it need not be disassembled armature, with sandpaper grinding brush commutator;(4)If there are 4 on the big spark, need to use sandpaper grinding commutator, even seriously the commutator vehicle and then must take the carbon brush and the armature disassembled . Of course a giant commutator is processed, it must change the brush grinding brush. 2 removing method for high speed motor in removing the end cover and the armature. Vibration will brush damage, should first put the carbon brush from the brush out of the bad. It is two carbon tax and carrying device angle may differ, to ensure that the installation can be restored to their original, or brush not anti-loaded, must be removed before. To the left and right brush to brush mark . In addition to never touch bad carbon commutator contact surface.

(1) We specialized in producing CNC machine tools, the product is the standard configuration of our machine
2 is one of the largest buyers of this spindle, the price is reasonable
(3) can send us an e-mail, or telephone counseling