Home  >  Chemical Process Machinery  >  Mixing Equipment

1)easy opperation, (2)long use life, (3)stable performance, (4)producing according to ISO9001 - details see: https://www.machineto.com/zjr-50l-vacuum-emulsifying-machine-electric-or-steam-heating-10298343

Principal Characteristics:

The pot cover and the stirring system takes the form of auto-move-up-and-

down.The material in water pot and oil pot is sucked into emulsifying pot in vacuum

by transmission pipes.The emulsifying pot is designed to be tilled over in case to dump

products.The material can be heated by electrical heater with help of head.conductive

medium it an also heated by gas.The heat temp.can be set and automatically controlled.material cooling is available.it is easy to operate.there is temperaturekeeping sheet between inner and

out sheath different stirring modes can be used simultaneously or individually.All the processes

of crushing,emulsifying,mixing,stirring and dispersing can be accomplished within a short time.

the area touching working material is made of stainles(steel SU316 is used for pharmaceutical purpose .with inner surface polished,the vacuum

stirring equipment meets the need of hygiene and manufactured in accordance with GMP stand.It is best for the production of ointment,cream.etc.

Working Theory:

The materials are heated and mixed in water pot and oil pot to be fully reacted.Sucked into

emulsifying pot by vacuum pump,the materials are stirred by both the center blade and side

scraper,which works on the inner surface of pot keeping stirring material from being stuck

onto the wall.in the process of blade-stirring,the materials are continuously crushed,pressed,

fol ded.Then,the materials are sent to the cutoff mixing unit where they are again cut off,

broken and stirred by the strong interaction between running wheel and cutting sheath.The

materials are finally crushed into small pellets of 200um2um.Besides,because of the vacuum

in emulsifying pot,the bubbles generated during stirring and mixing process are sucked out from material .

Standard configuration and structure :

The frame center blades scraping the wall stir + homogeneous head

vacuum/heating/cooling/electric lift system,oil and water pan(dispersion),

materialswith sus316 or sus 304,stirer speed and homogeneous speed

controlby inventers,buttons control,use for food will in accodrance with GMP.

Specification

Emulsifying pot	Design Volume (L )	50
	working Capacity (L )	40
	Scraper Stirring Power(kw )	1.1
	Scraper Stirring Speed(rpm)	0--86
	Homogenizer Power (kw)	1.5
	Electrical Power(kw)	2
	Homogenizer Speed(rpm)	2800
Water pot	Design Volume (L)	38
	Capacity(L)	30
	Stirring Power(kw)	0.55
	Stirring Speed(rpm)	1400
	Electrical heating Power(kw)	2
Oil pot	Design Volume (L)	25
	Capacity(L)	20
	Stirring Power(kw)	0.55
	Stirring Speed(rpm)	1400
	Electrical heating Power(kw)	2

(size): The whole(L*W*H):1450*600*1950-2500M

About us :

products

contact