Zhengzhou artificial sand washing machine with little sand loss
Condition:New | Motor Type:AC Motor | Power(W):5.5-15kw | Capacity(t/h):20-130 |
Place of Origin:Henan China (Mainland) | Brand Name:Bangke | Model Number:XSD | Dimension(L*W*H):3845*3000*3080 |
Weight:5.5-9.8t | Certification:CE,ISO | Warranty:one year | supply ability:adequate |
installation:under our engineer's guidance | business nature:manufacturer | quality:CE,ISO | guarantee:12 months |
capacity:20-130t/h | color:as your requirement | ddelivery time:within 30 days after receipt the prepayment | power:5.5-15kw |
drawing:can supply |

Zhengzhou artificial sand washing machine with little sand loss
Artificial sand washing machine application:
1.Art-worn around protecting plate can be reversed end for end to use again which improve the operating factor by more than 48%.
2. Assembled hammer reduces the cost by more than 30%. In addition, adding the assistant hammer which protects the frame when the main hammer is worn.
3. The core wear resistant material adopts the American high-standard wear resistant material.
4. Artificial sand washing machineadops the lozenge impact plate protects the frame better.
5. Adopt international famous brand bearing from Japan, Sweden, America and so on.
6. Advanced shoot opening and fluent inner curve reduce the flowing resistance which improve the throughput by large extent.
Artificial sand washing machine working principle:
The electric motor of theartificial sand washing machineruns slowly with the impellor after decelerated by the belt, decelerator and gears wheel. The sand and stone flow into washing launder from feeding launder, rolls with the impellor, and grinds each other. The impurity covering the sand is washing away. At the same time, add more water, the strong water flow will take away waste and some low-weight wastes from washing launder. Through the above process, the washing function is finished. The clean sand and stone is lift up by vane. When it goes up slowly, the water begins to drop through the mesh and fall back in the washing launder. On one hand, water is removed from the sand and stone; on the other hand, the water can be fully used. Finally, the sand and stone goes to the out launder from the rotary impellor to finish the washing task.
Artificial sand washing machine use and maintenance:
1, Artificial sand washing machineshall be equipped with electrical protection device.
2, Artificial sand washing machine is running early, check every day at least once a bolt to prevent loosening.
3, When the motor direction of rotation does not meet the requirements, you can adjust the power supply phase sequence.
4, The motor should guarantee good lubrication, each running about two weeks to add lithium grease (ZL-3) once, come on, through the oil by adding appropriate amount of lithium grease cup. When using sealed bearings, the motor is not installed on the oil cup.
Artificial sand washing machine parameters :
Type | XSD2610 | XSD2816 | XSD3016 |
Impeller Specialition (mm) (D*W) | 2600*1000 | 2800*1600 | 3000*1600 |
Impeller Speed (mm) | 1.178 | 1.177 | 1.179 |
Max Feed Lump size(mm) | ≤ 10 | ≤ 10 | ≤ 10 |
Capacity (t/h) | 20-50 | 30-80 | 50-130 |
Power (KW) | 5.5 | 11 | 15 |
Machinery Weight (t) | 5.5 | 7.5 | 9.8 |
Decelerator Modles | ZQ50-50-I-Z | ZQ60-50-I-Z | ZQ65-50-I-Z |
Overrall Dimension ( L*W*H) (mm) | 3255*1982*2690 | 3540*3000*2880 | 3845*3000*3080 |
Note:The technical parameters above are just for your reference. If there is any change, all parameters and overall dimension are subject to operating instructions. Any questions please feel free to contact us. Our website iswww.bkcrusher.com. If you are interested in some of our machines, please feel free to visit our website or contact me for more information and pictures. We are looking forward to establishing long-lasting business relationship with you in the near futures.
In order to give you more information, could you tell me the following questions?
1 what is the raw material?
2 what is the max feed size?
3 what is the capacity per hour?
If you need more information, pls feel free to contact us:
Skype: lily-jiao611

Packaging Detail:Export standard container-20GP or 40GP, 40HQ,FR container in bulk, the spare parts in wooden or iron case according to the size and weight |
Delivery Detail:20-25 working days after receiving 30% prepayment |