Home  >  Wood Working Machinery  >  Woodworking Machinery  >  Wood Chip Machines

1.Wood waste grinder;, 2.High productivity and efficiency;, 3.Low consumption;, 4.Simple operation;, 5.Fine grinding. - details see: https://www.machineto.com/wood-waste-grinder-10349917

Wood Waste Grinder

Introduction of wood waste grinder:

This wood waste grinder can crush the rod of 3 cm or so into granule of 3 mm, and can be used in charcoal, density plate producing enterprise, etc.

Wood waste grinder can process dry and fresh wood ranch diamator. <6inch (150mm)

After crushed, the output size can reach diameter 3-5mm, which is suitable for further or drying.

Raw materials of wood waste grinder:

Wood branches,chips, rice, straw, wheat straw, corn straw grass river reeds palm husk soybeans husk coffee husk paddy straw sunflowers stalk bamboo and many other agro-waste etc.

Structure of wood waste grinder:

It is composed of machine body, knife chipping part, chips re-crushing part and sieving part,etc.It combines both chipping and crush in one machine, can make sawdust in one passage, no need to use wood pellet crushing machine for preprocessing of wood logs.

Safe advices of wood waste grinder:

To ensure security, the feed inlet of this wood chipper crusher adopts self-selection design to avoid serious damage to operators.

This type wood waste grinder has advantage of low investment and energy consumption, high-quality finished products, easy to operate and maintain,etc.

This wood waste grinder can crush the small wood branches, straw, peanut shell, cornstalk etc, into pieces alike sawdust, tocreate proper working condition for man-made wood briquettes or wood pellets; it could be driven by the electrical motor diesel engine.

Features of wood waste grinder:

1 Even crushing function of multi-cavities which is suitable to crush hard material.
2 Reasonable design of leveling plate making the finished material finer and cubic-shaped without internal cracks.
3 Low and big feed opening make the production line easy to arrange and increase the size of feeding material.
4 Hydraulic start-up which is convenient for maintenance and replacement of wear-parts.
5 New anti-abrasive material which prolong service life of impact hammer, impact plate and liner.

Technical parameters of wood waste grinder:

Model	Weight, MT	Capacity, MT/hour	Power, KW	Raw materials type
TL-H40	0.50	0.3-0.4	7.5	Straw and stalk, Wood, Tree branch, Hard materials, such as bamboo,Cotton stalk etc.
TL-H45	0.65	0.5-0.8	11-18.5
TL-H50	0.85-1	0.3-0.6	15-18.5
TL-H60	0.98	0.5-0.8	18.5-22
TL-H80	1000	0.5-1.0	18.5	Suit for briquette making