Home  >  Packaging Machinery  >  Packaging Line

1.3/5/7 ply corrugated production line, 2.Professional production, 2.Advantage:economic and reasonable price, 3.High quality - details see: https://www.machineto.com/wj2200-5-ply-corrugated-board-making-plant-10061986

1.Width of paperboard:2200

2. Desigh speed: 180m/min

working speed:120-150m/min

3.Annotation: the Kraft paper for testing of the corrugation plant line should keep the requirements as follows. (The temperature of the surface of the heating parts in the corrugation plant line is above 172 degree)

Kraft paper’s level can not be lower than B level

Water content: 11%±2%

Face Paper: 100—250g/m²

Core Paper:100--250g/m²

Flute Paper: 100—200g/m²

4. Flutes combinations: A, C, B, E (or choose by the customer)

5. Steam requirements:

Steam cost: 4000 Kg/Hr Max pressure: 1.2Mpa

Practical Pressure: 0.8-1.2Mpa

6. Power supply: 380V 50Hz (Three phase four wire system)

7. Total Power: About 300 kw

Practical power cost: About 260kw

8. Area of the Production Line covers: About 90m×6m×5m (The specific length is based on the foundation drawing)

9. Corrugated board stacking direction: left or right according to the workshop to make sure the drive in left direction or right direction.

10. Equipment suitability: Kraft paper A, B, C native paper or imported Kraft paper.

2,The parts that the customers should buy or prepare by themselves:

1Steam heating system: suggest buying a 4000kg/hr steam boiler, pressure: 1.25Mpa,steam recycling machine, steam pipe.

2Air compressor, air-pipe, and the glue transport pipe.

3Electric power source, power wires connect from operation counter to power counter, and wire and pipe.

4Water source, water transport pipe, water bucket

5Water, electric, gas, ground work and civil work.

6The material paper and corn starch (potato),caustic soda, borax are used when the 1^sttesting of the production line.

7Lubricating oil, consistent lubricant, machine oil, hydraulic oil.

8Customers need to install the assist tools (such as electric welding machine, cutting machine,screw die, tripod, pipe cutter, oxygen cutting, welding and other useful tools

9Provide food, accommodation of the installer ,pay the workers’ salary (50USD per day) and the cost of round flight tickets when installing.

Configuration list