Home  >  Metal Processing Machinery  >  Metal & Metallurgy Machinery  >  Metal Cutting Machinery

GT -1530 water jet, 1.1structure feature, 2.Casting beam and Y-axis base frame make it have excellent - details see: https://www.machineto.com/waterjet-cutting-machine-1530-laser-type-10163990

metal cutting machine

- Z-axis:150mm

- repeatability:0.0025mm

- X,Y speed:0-15m/min

- control accuracy:±0.01mm

- cutting accuracy:±0.1mm

power:380VAC, 50Hz , 3 phase 4 wire system(can be customized)

1.1.4Transmission system

- We adoptHIWIN (Taiwan) or ABBA lead rail and gear rackto ensure accuracy

durable and quality.

1.1.5Prevention system

- Over travel auto spacing function and soft spacing function

- Unique prevention design: new mazy protection and z-axis totally enclosed professional design prevent sand and water from eroding the guide screw and lead rail.

1.1.6Lubrication system

- We adopt auto mass lubrication system to make oil reach every oil site on time and also make table steadier and easier.

2Abrasive cutting system

Abrasive cutting system is composed with CY integrative cutting head, CY Hp water switch, CY abrasive meter, sand valve and sand feeding bin.

2.1 GT integrative abrasive cutting head

The cutting efficiency ofCY integrative abrasive cutting head is one of highest machine in the world.

- It has rectification function and lessens the time of assembling.

-Changing the wearing parts is simple.

2.2 hp water switch

-Air valve can open and close the hp water instantaneously.

- With the help of CNC we can control hp water automatically.

-Blockage pressure can be adjusted arbitrarily to realize the operation under the low pressure circumstances.

2.3 GT-sand feeding system

1.1.2Controlling system

We adopt the famousNAIKY controlling system and MITSUBISHI AC servo digit driving system and AC servo motor.

- 17”LCD liquid crystal display

- DNC on-line working function

- Functions of returning arbitrary point, bending, and circular arc working auto deceleration.

- Function of cutting figure imitation display.

- 80GB memory hard disk

-MITSUBISHI AC servo driver and motor.

-1GB memory card

- Multilingual function(Chinese English ,etc.,)

- Drive-by-wire and hand-hold controller,(according to requests)

1.1.3Chief technical parameter

- structure:Bridge

- size(X×Y):3100mm´1600mm

- X-axis:3000mm

- Dynamic sand feeding

- Manual makes up the sand for the feeder (assisted with sand meter, auto feeder can realize automatically feeding)

2.4 DCAS-B sand valve

-Dynamic sand feeding

-Dynamic typecomes over traditional type.

- Manual type makes the operation easier.

-With the help of CNC we can control abrasive automatically.

2.5sand hopper

- Side-hanging sand hopper

- There is a window on the side face. It can remind workers when to feed sand

- It can provide the sand consumption every time after it is filled up.