Home  >  Raw Material Processing Machinery  >  Rubber Raw Material Machinery

1. with ISO9001,ISO14000, CE, SGS international certificate, 2. 45-50% oil from waste used tyre, 3. 5-8 yeas machine life - details see: https://www.machineto.com/waste-tyre-to-oil-diesel-refinery-machine-10340562

The Nomal Questions and Answers as follows:

1. The extra waste gas could not be emitted directly in the air, as it would get accumulated in the surroundings, and even a single spark can lead to blast.

The waste gas is transferred back to the heating chamber to heat the reactor as fuel. During this period, it only cost little coal. It is hard to store this waste gas, because this gas is coming together with the tyre oil gas. The cost for storing this waste gas is more than the porfit this waste gas can give. So usually this waste gas is burnt for heating the reactor.

2.Carbon black gets accumulated at it output pipe. How it can be auto-shifted to the store?

In the reactor, there is weld sprial conveyor on inwall. When one batch finish, cool down the reactor for several hours. Open the carbon black dregs door, let the reactor rotating in the opposite way, the carbon black will be transferred out automatically.

Then you can make one pool beside the carbon black door, or you use the spiral carbon black dregs machine to help.

3.They say that oil should be removed from the tank before running II cycle of reactor. Then weather the another storage tank is required so that first one could be emptied before II cycle?

Yes,they are right, the oil shall be pumped out before running II cycle of reactor. We provide the oil pump. For the oil tanks, we can’t provide very big one, because the containers don’t have much space. The customer need to make by himself one big storage oil tanks.

4.What is the application of raw carbon black?

Usually, the carobon black is sold out directly as rough carbon black. Or the carbon black can be refined again, become good carbon black.

5.Steel removal is the biggest question, as it gets entangled within the reactor.

No, the steel is easy to be out. When the carbon black finish dregs. There is only bunches waste steel inside the reactor. Then pull it out. Or you use the steel pulling machine, we can provide this if you order.

6. What would be the % output ratio of oil, steel, carbon black if different types of tyres are used like cycle, motor-bilkes, car, truck/tractors and also for radial and nylon?

Usually, the tyre oil output depends on the tyre rubber quality and content. In average, the car or truck tyre: oil 40- 45%,carbon black 35%, steel wire 10%,waste gas 10%. The motor-bikes is around 40-42%. Another issue is that we would provide the foundation drawing. And we send engineer or technician to do this guiding installation, comissioning and training workers.

TYRE PYROLYSIS MACHINE DETAILS INFORMATION

NO	Name	parameter
1	The raw materials:	waste tires, plastics and oil sludge
2	Total Capacity:	6 t/day, 7.5t/day 8t/day, 10t/day, 12t/day,
3	the size of reactor:	2.2*5.1m, 2.2*6m, , 2.6*6m, 2.8*6 m 2.8*6.6m
4	Average oil productivity:	Tire:40%-50%,plastic:60%-70%
5	Average carbon productivity:	30%-35%
6	Average steel productivity:	10%-15%
7	Average waste-gas productivity:	5%
8	Pyrolysis time:	8 hours
9	Discharging time:	3 hours
10	Feeding time:	2 hour

Working process:

firstly: two or three worker put the raw material into the furnace, seal the feed inlet .then burn the coal /wood in the botton of the furnace ,or be heated by electricity directly and the bottom of the reactor will slowly heat the waste raw material .when the temperature reach of 250°C 280°C,we will get the crude oil ,the oil gas will be produced untill the temperature reach to200C- 300°C.

and then the oil gas will be separate to light and heavy component by separate divice.the light component will be entre to the condenser and meanwhile the residues will be discharged automatically in succession.after the condenser ,the liquefied part will be crude oil ,and the waste gas (it is mean that that part can not be liquified )will be return to heating supply system for burning by the way of combustion gas purification system.

Raw material		Oil yield	Steel wire	Carbon black	water
Waste tire/rubber	Big tyres	45%-50%	15%-20%	30%	5%-10%
	Car tyres	40%	10%-15%	45%	5%-10%
	Bicycles and motorcycles tyres	30%-35%	5%-10%	45%	5%-10%
Waste plastic	Fishing net	45%-50%		30%
	Safety net, farm-oriented film	45%-50%		30%
	Convenient bags, weave bags	40%		25%
	Off-cut of recycled paper mill	20%-30%		20%

THE DELIVERY OF PYROLYSIS MACHINE

We will delivery the machine within 15-25days after get the advance payment(30% of the total amount).

THE WARRANTY AND MACHINE LIFE

We guarantee the complete machine one year, the reactor life more than 4 years,others parts no need change lifelong expect the wearing parts.

THE PYROLYSIS MACHINE MANUFACTURE TOOLS

Automatic submerged arc welding machine, ultrasonic flaw-detecting machine, CO gas shielded welding machine