Home  >  Industrial Supplies  >  Refrigeration & Heat Exchange Equipment  >  Heat Exchanger

1.ISO9001:2008, ROHS, 2.Antirot hydrophilic aluminium foil, 3.Angle:90 degree, 4.Plate distan - details see: https://www.machineto.com/ventilation-aluminum-core-10241651

Material

The cross flow heat exchanger is made of anti-corrosive hydrophilic aluminum foil and galvanized sheet framework, process by special technology, with high heat transfer efficiency, also easy to maintain and have long service life, etc.

Punctiform Five-layer curring 45°angle 90°angle

Working principle

When the different temperature and humidity exist in two air streams, the transfer of humidity and heat will be occurs. Then the outdoor air and exhaust air will be completely separate, stop the exchange of odor and moisture.

Two air streams cross enter into the heat exchanger, temperature transfer from the hotter side to the colder side, humidity transfer from the bigger side to the smaller side, two air exchange the energy through the plates, so as to recover energy from exhaust air.

Cross flow

Feature

1. Adopted high quality corrosion resistant hydrophilic aluminum foil as heat conductor, processed by special technics, high efficiency, easy to maintain, and long service life, etc.
2. Module structure, different size of edges and superposed thickness to be choice.
3. No running components, and low maintenance cost.
4. Compact structure, small volume and suitable for various occasions.

Production technology

1. The face of heat exchanger processed with strengthened heat transfer stamping, increased the 10% heat transfer area.
2. Adopted stamped and round convex as air channel support, guaranteed the strength and tightness of Channel, also could bear high pressure.
3. Between outdoor air and exhaust air channel, separated by aluminium foil, entry and exit edge processed with five layer crimping techniques, ensured the excellent air tightness.
4. All joints are airproofed by airproof glue, ensured that the heat exchanger has excellent air tightness.

Model Range

Dimension(mm)			Plate distance (mm)
A	B	C90/C45
On request ≤600	On request ≤1000	On request (45°/90°)	2.0-6.0

Remark: The section size, height and plate distance of core can be produced on request, if the required sizes are out of our maximal one-time molded size, we also can provide combination type core, the efficiency will the same with requested.

Applied range

1. Apply to obvious temperature difference and small humidity area, especially for no return air occasion.
2. Apply to energy recovery in room ventilation system.
3. Apply to energy recovery in industry ventilation system.
4. Apply to energy recovery in industry heat recovery system.
5. Cold energy recovery in summer and heat energy recovery winter.

Welccome to contact us!