turn key biofuel plant poduce pellet and briquette

biofuel plant, new pelletizer/chopper, make pellet/briquette, moisture require up to 20%, high efficiency/Low energy - details see: https://www.machineto.com/turn-key-biofuel-plant-poduce-pellet-and-briquette-10353928

Condition:New	Place of Origin:Shandong China (Mainland)	Brand Name:GLDL	Model Number:GLDL-SCX-A
Voltage:customized	Power(W):customized	Dimension(LWH):customized	Weight:customized
Certification:CE	Warranty:1 year	Capacity:1-1.5T/H	Production dimeter:6-80mm
Production density:1-1.3g/M3	Production moisture:under 8%	Name:biofuel plant

Biofuel Plant

This biofuel plant is from Qingdao Green Energy (GLDL) Machinery Co., Ltd which is the leading supplier based in Qingdao China.

The GLDL biofuel plant line uses innovative technology, providing a significant change in the way wood mass is formed into pellets, resulting in a substantial reduction in production power demand, much longer working life and lower maintenance rate and cost because no bearing structure compared to traditional methods for the pelletizer and using chopper then dont need crusher.

The pellets production line can produce both the pellet and the briquette,achieved a multifunction production line.

Introduction of wood pellets production line

1. This wood pellets production line use the new type machine, produce the wood pellets and the wood briquette by piston punching.

2. The main motor of the pellet mill is 45 KW, this motor drives a piston to punch the material with 300 tons of impact force, to ensure the density of the pellet can reach 1-1.3g/cm³.

3. The punching frequency is 272 times/min, ensure that the capacity of pellets is about 1-1.5T/H with different material.

4. This biomass pellets plant can fit more kinds of material without changing the die, such as the grass, straw, all kinds of wood and all kinds waste

5. Wide moisture requirement from 8%-20%, reduced a big power consumption from drying system.

6. The system use a chopper to crush the log instand of chipper and hammer mill, as saving a lot.

Economic benefit comparison among Circle-mode Granulator and Vertical Circle-mode Granulator

Note: H: high, M: middle, L: low, Y: yes, N: no, M: more,Hr: hour.

Parameter	Punching type	Ring die mold	Vertical circle mold
Feedstock universality	H	L	H
Compression ratio	L	H	H
Diameter finished pellet	Φ6-80MM	Φ6-12MM	Φ4-12MM
Multi-function	Y	N	N
Maintenance Rate	L	H	H
Main power	45	110	90
Elec-comsuption	5.8USD/T	14USD/H	11.6USD/H
Capacity for 6mm	≥600	≥600	≥700
Density	1-1.3	1-1.3	0.8-1.1
Bearing exchange	N	Y	Y
Press roller& cover exchange	N	Y	Y
Working life for the mold	300Hr	300Hr	300Hr
Price for the mold	L	H	H
Requirement for material moisture	6-20%	8-13%	8-13%
Weight	8T	4.5T	7T
Price for the machine	28,400.00USD	35,483.87USD	33,870.96USD
Contrast conclusion	Through the data above, as the new kind pellet machine & the pellet-briquette all in one machine can fit more kind of raw materials, by the 300T impact force, and 272times/min high-frequency punching motion, it will become the mainstream of the compression molding equipments

Introduction of the pellets production line

1.The crushing system, deponds on the raw material, if use wood logs, here will be a chopper, if use chips and some other smaller material, here will be a hammer mill.

2.Drying system, because our new pellet mill can produce by the material with 20% moisture, so here will be reduce a lot energy cost.

3.Pellet making system. use our new pelletizer, you canachieved a multifunction production lineto produce the pellet and briquette by changing the die from the same production line.

4.Pellet cooling and screening system, by this system, the dust will be cleaned, and cool the pellet to room temparature for packing.

5.Packing system. by this system, you can packing the product into bags with setting weight. or change this part to bunker, to loading the truck directly.

Packing and loading the equipment of pellets production line