Home  >  Industrial Supplies  >  Refrigeration & Heat Exchange Equipment  >  Ice Machines

1.Edible Tube Ice Machine, 2.Stable of production, 3.Easy for storage, 4.High reliability, 5.Certification:CE,ISO9001. - details see: https://www.machineto.com/tube-ice-machine-commercial-tube-ice-machine-10242656

Tube ice machine

Principle of the machine

After the refrigeration system normal working , the water in the bottom water bin take form the outlet transpored to the inlet of the upper water bin by the chilling pump, and then through the water segregator as a screw flow way along the inner wall of the recuperator tube flowing downward with the refrigerant on the surface of recuperator tube doing heat exchange ,then the temperature is reduced, parts of water will be formed ice tube in the inner recuperator tube, the water that don’t formed ice after fall of temperature will be flowing into the bottom water circulating again and again, so the cold energy will loss just a little.

After a certain time, the\water stops circulated, the refrigeration system change into ice dropping model, ice cutting , the refrigeration on surface of the trcuperator tube will be turned into high pressure refrigerant gas, the heat gas exchange heat with the ice maker and make the ice tube melt little, then the ice tube without the gravity, slide down into the ice cutting structure, and cut ice tube to small tubes.

Features:

1. Ice daily capacity range:average level 3000kg, from 2960kg to 3300kg depends on the local temperature;

2. Evaporator materials:stainless steel 304, corrosion-resistant, making the ice clean, health, tasteless, sanitary;

3. External diameter:22mm (European Market recommanded) 35mm(Southeast Asia Market recommanded) 29mm(General);

4. Inner hole diameter:5mm to 10mm, adjusted to ice-making time, for a good air permeability and long storage life.

5.Ideal for cooling drinks, for bars and restaurants and other.

6.High reliability and low fault failure:80% components of the tube ice maker system are world famous brand. STARICE products can run continuously without fault and keep good run and stable ice output even in ambient temperature 5°C-4O°C. Special designed machine can even allow normal run in the most atrocious conditionns(-5°C—+56°C).

7. Scientific design and advanced processing technique STARICE tube ice maker has scientific design and can also make the best ice making system according to customer's actual demand, with world leading ice making technology and processing and testing equipments. Each part is processed with strict technique requirement and strictly tested before using.

8. SanitaryQuality and sanitary tube ice maker is the aim of STARICE. All parts contacting with water are made of stainless steel SUSSO4 or SUS316L and PE material. Tube ice produced is sanitary without smell, meeting HACCP and PDA certificate requirement.

9. Efficient and environment friendlyWith stable continuous running, STARICE tube ice maker realizes the running without energy wasting. Compared with other ice making equipments, STARICE tube ice maker boasts the advantages of compact structure, small area, low production cost, high refrigeratjon effect and low energy consumption, etc.

10. Module design and simple maintenance STARICE tube ice maker has module design for simple maintenance on site. Tube ice maker can be installed inside a standard container, very suitable for frequent moving occasion.

Advantages:

1. Design/Engineering Simplicity

2. No requirement of skilled workers

3. High durability, minimum maintenance

4. High-energy efficiency

5. Prompt services

Tube ice machine application

1 Human consumption ice plant

2 Port ice plant

3 Coffee shop,bar,and hotel,etc

4 Supermarket,convenienience shop and restaurant,etc

5 Aquatic products and food fresh preservation

6 Logistic fresh preservation

7 Cgemical and concrete projects

Specification:

Model	Ice Making Capacity	Rated Power	Circulating Water Pump Power	Cooling Water Pump Capacity	Cooling Fan Capacity	Ice Cutter Motor	Machine Dimension	Weight of Machine
No	Ton/24h	k w	k w	k w	k w		W*H*L(mm)	KG
SIT-1T	1.0	3.69	0.37	1.1	0.18	0.75	1320*950*1800	900
SIT-2T	2.0	7.11	0.55	1.1	0.18	0.75	1400*1100*1800	1200
SIT-3T	3.0	9.68	0.55	1.1	0.37	0.75	1500*1100*1950	1500
SIT-5T	5.0	17.47	0.55	1.5	0.75	0.75	1600*1250*2200	1800
SIT-10T	10.0	30.89	0.75	2.2	1.5	1.5	1700*1300*2200	3500
SIT-15T	15.0	42.6	1.5	2.2	2.2	1.5	3000*1500*2200	4250
SIT-20T	20.0	53.2	1.5	2.2	2.2	1.5	3500*1500*2200	6500

Machine running condition: Water temerature: 23°C, Evaporating temperature: -12°C, Condensing temperature: 40°C, reference valve under 50Hz power condition. Real production of machine will have a little changement according to change of water temperature and ambient temperature.