Home  >  Raw Material Processing Machinery  >  Rubber Raw Material Machinery

1. We have semi-auto and fullly-auto prodcution line, 2. Cpacity can design as your requirement, 3. The final mesh max 100 mesh - details see: https://www.machineto.com/tire-recycling-machine-with-ce-10340002

We have export to Russia/South America(chile)/ Indonesia and so many countries, welcome your coming and vist our factory, I and our power team always here waiting for you. ..........................................Miss Jane

Tire recycling machine(semi-auto)

1.Ring cutter

This machine mainly used to cut the sidewall of steel wire tire ,and then to the next step of segmentation .First, put the tire on the platform, then rotate the hand wheel , the three claws will stick the inner tire firmly ,Second ,Starting power,work platform will rotation ,cutting tool according to need to cut tire slowly step by step . until the tire side cut off.

Item	Specification	Ring cutter
motor power	5.5
Speed of main screw	46.8 r/min
Max Diameter of tyre	1200mm
Dimension	1100*900*1700

2.Strips cutter

strips cutting machine can cut cycle machine to remove the wire tire sidewall cut into strips ,and the width of the adjustable section .Two circular knives for special materials ,hard and durable , can be used repeatedly grinding for no more than 1200 steel tires.

Item	Parameter	Strips cutter
Motor Power	5.5kw
Disc Diameter	380mm
Rotate Speed	18.4r/min
Dimension	1290*870*1550

3.Block cutter

Block cutter is designed to cut car, truck and rear tractor tire. range is up to 120cm truck tires. the tire cutter adds flexibility to your total tire cutting system by providing you the opportunities of accepting tires up to 120cm into your system ,The unit also allows your system to cut 60-70 truck tires per hour or 120-150 car tires per hour.

Item	Specification	Block cutter
motor power	11kw
Speed of main screw	420 r/min
Out diameter of cutter	200mm
Dimension	1130*830*1100

4.Bead wire separation

Be utilized to separate rubber and steel wire of bead in order to get whole steel wire .

Feature:It is easy operation ,easy to be installed and maintained high efficiency and clean etc.

Item	Specification	Bead wire separation
Motor power	15 KW
Linear speed of front roller	15.5 m/min
Ratio of speed	1.1
Dimension	1520*1150*12101mm

5.Tyre crusher

This machine is mainly used to crush waste tire and rubber .the structure is gear transmission

6. Selection and transportation system

Fully-auto waste tire recycle line

Usage:

It could be applied to cut all kinds of rubber blocks and strips. It is good for cutting rubber tyre, rail tyre, rubber strips etc.

Construction & Principle: :

It mainly consists of the motor, cutting blades, static blades, frame, oil cylinder, hydraulic system, control box, etc.

Its basic principle is: The oil cylinder and hydraulic system are driven by a motor. Put the tyre without wire bead on the stand of the static blades. The tyre is fixed by locking arms tightly then cut by the blades driven by oil cylinder. The tyre is cut into several blocks, which will be more easily crushed or shredded for the next process.

Technical Data:

Model:	900	1200
Capacity(pcs/h)	10~30	20~40
Handling tire(mm)	≤1000	≤1200
Main power(kw)	5.5	7.5
Working pressure(mpa)	8	12
Length of Blade(mm)	680	800
Cylinder Hydraulic(mm)	125	150
Weight(T)	1.2	2.2