THY-210A diesel oil filter for engineering machinery

THY-210A diesel oil filter :, 1. excellent designand good materials, 2. used for various vehicles,engineering machiner - details see: https://www.machineto.com/thy-210a-diesel-oil-filter-for-engineering-machinery-10227747

Condition:New	Type:Suction Filter	Structure:Cartridge	Place of Origin:Shaanxi China (Mainland)
Brand Name:Janenope	Model Number:THY-210A	Weight:4.2kg	Dimension(LWH):252126361
Certification:ISO9001	Warranty:1 year	filter:used for desel filtration

THY-210A diesel oil filter for engineering machinery:

Specification:

the size of vat:252x126x361

the size of oil tube: M14x15

rated flux: 0-10ML/min

net weight: 4.2kg

filter element:C1020Ax2

introduction:

Tianhou Filter technology company is specialized in researching. manufacturing. saleing diesel oil filter for 10 years.THY-210A diesel oil filter foe engineerng machinery is mainly applied to various vehicles and low power diesel engine powered equipment below 400HP. it can filter 95% water and more than 90% impurities in diesel oil for protecting your engine and save your cost.

our products: diesel oil filter for vehicle and engineering machinery , diesel oil flter for boat, diesel oil filter for diesel generator.service station.oil deport.oil tank etc. more details, you can visit ourwebsite www.checkoil.com

installation
providing much cleaner diesel fuel for your diesel fuel engine, forming double protection for diesel engine and its "Three Filter". The installation position is on the oil supply tube between oil tank and diesel Filter of "Three Filter"

Applications:
Small Volume THY-210A diesel oil purifiers can be applied to various vehicles and engineering machinery powered by diesel engine below 400HP

Replacement of filter core:
1) Turn off the engine and unscrew the exhaust bolt on the top of the product;
2) Unscrew the blowdown handle on the bottom of the barrel by hand to discharge the oil in the case;
3) Hold on the barrel body by your left hand, use a wrench to unscrew the binding bolt on the top cap of the barrel by your right hand;
4) Remove the barrel, clasp the ring of the filter core with your finger, take out the old filter core, clean the residual impurity out of the case and then tighten the blowdown handle;
5) Vertically install a new filter core into the case, align the case with the top cap and fasten the binding bolt. Normal operation is allowed only when the air in the system has beenexpelled.

Packaging Detail:carton

Delivery Detail:7 days