Home  >  Metal Processing Machinery  >  Machine Tools Accessory  >  Drag Chain

plastic link totally enclosed, 1against the hot metal debris,wood chips,dirt and dust, 2demanding environments., 3medium speed - details see: https://www.machineto.com/tf35-plastic-link-totally-enclosed-10152433

TF35 plastic link totally enclosedfeatures:

1.All lids can be opened for installing wires into conveniently .

2.Has long life time. repetitive motion times is more than million times.

3.Totally enclosed ,there is no gap and clearance between two lids.And protect wires from water ,oil,dust .

4.Have great carrying capacity ,the minimun is 200Kg.

5.Material is plastic and aluminum,have CE.

6 It is environmental protection.

Description:

1.The low-cost Energy Tube for applications with slow to medium speeds.

2.To access the Energy Tube, prize the lid open with a screwdriver.

Features and benefits:

1.Excellent protection against chips (including hot chips)

Type	Inside Diameter (inside height*inside width)	outside Diameter (Outside height*outside width)	bending Radius (R)	Pitch	Remark	Serial number
TF3550	35*51 (12288/12292/12296)	52*67	100.125.150 175.200.250	42	Totally enclosed,Botton lid can be opened	connector:12291
TF3576	35*76 (12289/12293/12296)	52*92	100.125.150 175.200.250	42		blue button:12127
TF3576	35*101 (12290/12294/12297)	52*117	100.125.150 175.200.250	42		separator:12298

Material	Rigid PA66
Temperture range	-40 °C~125 °C

MOUNTING VARIATIONS:

Chains placed horizontally

Krius chains,thanks to a large range of models and versions,satify many requirements in variety and combination of motions.On this page the various combinations of mounting are listed.

For further information about realising a personalised projected please contact our technical department.They are at you disposal to resolve any specific problems you may have and can design according to your particular request.

Chain placed Vertically

Krius chains also provide answers to problems concering vertical motion.Due to their particular design krius cable chain can also be used in applications with extremely long travel distances.

Determing the chain length

Fixed point at the centre of total travel

the chain length (L) is calculated by summarising the half stroke LA/2 to the nominal value (b) of the bending radius.The value is then rounded up the multiply of the chain pitch for nylon cable chains and to an odd multiply for steel chains.

Fixed point not positioned at the centre of total travel

The chain length (L) is calculated by summarising the half stroke LA/2 the nominal value (b) of the bending radius and the distance (DPJ) from fixed piont to centre of total stroke.

The value is then rounded up the multiply of the chain pitch for nylon cable chains and to an odd multiply for steel chains.

Long Horizontal Travel Distance

Cable chains are used more frequently on long travel distance as a valid altermative to the traditional systems of conductor bars or to festoon systems,and offer the following advantages:

1.the possibility of the combined transportation of hydraulic cables/tubes.

2.the possibility of use also in critical environments (humidity,textile dust,negative chemical and atmospheric components etc.)

3.High velocities and values of acceleration.

4.Notably shorter installation times.

5.Drastic reduction in the time taken for maintenance.