Stone mining Motor Driven Hydraulic Splitter, Stone Splitters
Type:Rock Splitter | Condition:New | Application:Rock Splitter | Motor Type:DC Motor |
Power(W):0.75kw, 2kw, 4kw, 7.5kw | Place of Origin:Fujian China (Mainland) | Brand Name:DSL | Model Number:DS90A-E |
Dimension(L*W*H):1.2m*1.2m*0.97 | Certification:CE, ISO9001 | Warranty:3 M | After-sales Service Provided:Overseas third-party support available |
Weight:80kg-120kg | Specifications(MM):1200*1170*800 | Fuel tank capacity:40L | Working medium:46 or 68 anti-wear hydraulic oil |
Splitter Length(mm):1100 | Configurable splitting machine number:1~10 handle | Splite Width(mm):12 | Diameter:36-50mm |
Introduction
The hydraulic rock splitter & concrete splitter is driven by the high-pressed oil from hydraulic pump to work. The technology takes theadvantage of hydraulic principle which can generate hundred tons ofsplitting force. So it can break a huge rock or concrete within severalseconds.
This product is mainly applied to stone mining, secondary breaking oflarge stone and partial or integral demoliton of concrete
facilities(walls, cement road, machinery base, bridge building parts etc). It hasbeen proved to be an extremely cost-effective
alternative to otherconventional demolition techniques many while has many good features:controlled demolition, environment-
friendly, easy to use, economic,small cubage and light weight.
Applications
iscellaneous - hard-set concrete removed from mixing drum
The Job:
The crane on a major construction site, which was indispensable to ongoing building operations, broke down and had to be repaired as a matter of priority. As a result, four concrete mixers, filled with liquid concrete, were forced to wait for a relatively
prolonged period of time before the first could be discharged. By the time the last mixer should have been emptied, the concrete
had set hard in the drum.
The requirements:
On previous occasions, one or two workers broke up and removed the concrete from the drum using light-duty pneumatic chisels. This process, however, made a deafening noise and took three weeks. Even large demolition hammers were tried, but not every drum was able to withstand the force these applied. Dynamite not only broke the concrete but the mixing drum itself. Therefore, an effective method, causing no damage to the drum, had to be found.
The solution:
Two workers, using a single DSL splitting cylinder and a light-duty hammer drill, removed all the concrete from the drum, in only
five days, without causing it any damage to the drum. This proved to be the optimum solution to the problem, thanks to its speed and the cost-savings it offered through reductions in working hours and safety precautions and, in particular, through the renewed availability of the mixer truck.
Specifications:
Hydraulic power Unit | ||||||||
Engine Model | Specifications | Weight | Fuel tank capacity(L) | Working | Engine | Working pressure | Work flow | Configurable splitting machine number |
(MM) | (KG) | medium | power | (Mpa) | (L/Min) | |||
Diesel engine type | 1150*1180*940 | 120 | 40 | 46 or 68 anti-wear hydraulic oil | 4.2KW | 55~60 | 2.13 | 1~10 handle |
Gasoline type | 1200*1170*800 | 100 | 40 | 46 or 68 anti-wear hydraulic oil | 7.5HP | 55~60 | 2.13 | 1~10 handle |
Motor type | 384*280*620 | 75 | 30 | 46 or 68 anti-wear hydraulic oil | 4KW | 55~60 | 2.13 | 1~10 |
(380V) | ||||||||
Pneumatic type | 364*280*620 | 100 | 40 | 46 or 68 anti-wear hydraulic oil | 4.04kw 5.5HP | 55~60 | 13 | 1~10 |
Hydraulic splitter gun | ||||||||
model | diameter | The minimum hole depth | Wedge length | crack wide | crack time | splitting force | weight | |
(mm) | (mm) | (mm) | (mm) | (S) | (T) | (kg) | ||
DS90A | 35-38 | ≥400 | 200 | 10--35 | 5--12 | 500 | 20 | |
DS90B | 38-42 | ≥300 | 150 | 10--40 | 5--12 | 700 | 22 | |
DS90C | 38-42 | ≥500 | 250 | 10--40 | 5--12 | 680 | 23 | |
DS90D | 38-42 | ≥600 | 300 | 10--40 | 5--12 | 600 | 28 | |
DS90E | 45-48 | ≥800 | 380 | 10--40 | 5--12 | 826 | 40 |
Service and Support
With many years of drilling experience, we know how important it is to have the right servicing capabilities in place. Dig Sword land machine provides a complete offering of servicing, training, and maintenance programs, and has a dedicated team of global Technical Support Groups.
To Honorable Customers:
Welcome to our store, If you are searching Mining Machinery, congratulations, your hunting has come to an end. Our company
manufactures and exports a comprehensive line of mining tools, including pnuematic hammer, air leg, hand held & internal combustion rock drill, hydaulic rock splitter air compressor and spare parts, all conforming to the international standards. Moreover, All Product are produce in house with large scale, Small profits but quick turnover is our strategy. So I believe you will find what you want here!
This item is available for immediate delivery.
For more Information, please feel free to contact me.
---------------------------------------------------------------------------
Fisher Wu
Tel: +86-591-8860-2995
Fax: +86-591-8380-8668
Mob: +86-158-0609-0610
Skype: fisher2687
http://www.digswordland.com/
Packaging Detail:Wooden Case, Carton Case or Up To You |
Delivery Detail:5 Days After Receipt of Your Payment |