Home  >  Mining & Metallurgy Machinery  >  Mining Machinery  >  Crusher

1.Weight2.9-99.6t, 2.Capacity1-800t/h, 3.Max.Feed Size125-1020mm - details see: https://www.machineto.com/stone-crusher-10311388

Application of Joyal Stone Crusher

The Stone crusher is widely used in mining, building materials, chemical industry, metallurgy and so on. The Stone Crusher is suitable for primary and secondary crushing all kinds of minerals and rocks with compressive strength less than 320 MPa.

Advantage ofJoyal Stone Crusher

1. Simple structure.

2.easy maintenance.

3. High crushing ratio.

4.even output granularity.

Working Principle of Joyal Stone Crusher

The strip and strip pulley are driven by a motor, and the movable jaw moves up and down via eccentric shaft. The angle between fixed jaw and movable jaw becomes smaller when the movable jaw runs down, then the materials are crushed into pieces. It will become bigger when the movable jaw runs up. The movable jaw board leaves the fixed jaw board under the action of pole and spring , then the end products come out from the crushing cavity.

Techniacal data of Joyal Stone Crusher

Model	Feed Opening Size (mm)	Max. Feeding Size (mm)	Adjustable Range of Output Size (mm)	Capacity (t/h)	Motor Power (kw)	Weight (t)	Overall Dimension (mm)
PE250×400	250×400	200	20-50	5-20	15	2.9	1430×1310×1340
PE400×600	400×600	350	40-100	15-60	30-37	6.8	1700×1732×1653
PE500×750	500×750	425	50-100	40-100	45-55	11.2	2035×1921×2000
PE600×900	600×900	480	65-160	60-140	55-75	16.5	2290×2206×2370
PE750×1060	750×1060	630	80-150	80-230	90-110	29	2655×2302×3110
PE900×1200	900×1200	750	95-165	140-320	110-132	54.5	3789×3050×3025
PE1000×1200	1000×1200	850	105-185	180-400	160-200	56.5	3900×3320×3280
PE1200×1500	1200×1500	1020	150-300	250-800	220-250	99.6	4300×3540×4043
PEX150×250	150×250	125	10-40	1-3	5.5	0.85	896×745×935
PEX150×750	150×750	125	12-45	5-16	15	3.8	1205×1495×1203
PEX250×750	250×750	210	25-60	10-40	22-30	5	1667×1545×1020
PEX250×1000	250×1000	210	25-60	15-50	30-37	6.8	1964×1550×1380
PEX250×1200	250×1200	210	25-60	20-60	37-45	8.5	2192×1605×1415
PEX400×1200	400×1200	320	35-95	28-95	45-55	11.7	2256×2100×1960
JCE1302	180×1300	150	10-30	12-50	30-37	6	1320×2150×1175
JCE1003	250×1000	220	20-40	15-65	30-37	5.6	1400×1850×1310
JCE1303	250×1300	220	20-40	26-85	37-45	6.8	1450×2150×1175
JCE604	400×600	350	35-85	15-85	30-37	10	1920×1460×1840

Handling Precautions of Joyal high efficiency stone crusher

1.After starting crusher in operation, once the crusher makes an unusual percussion sound, we should stop moving forward ,identifying and eliminating defects , restart.

2.Crusher must be no-load to start. When the crusher is operating normally and then open to the mining equipments .We should add the ore mine to equipment gradually until full up .

3.Crusher should be given mine well-proportioned, ore can't packed with crushing cavity ; to the maximum size don't allow to exceed mine to the mine mouth width of 0.85 times; the same time when the crusher gives mine ,we should avoid the mine ore iron and the iron abundance of non- crushing material into crusher; Once we find non-crushing material through the port of discharge ,we shall immediately notify the belt transport staffs take measures in time, so as not to causing serious equipment accidents when mine will go into the next crusher.

More Pictures:

Thanks for your interesting in our product stone crusher. There are more than 10 Models of stone crusher in our company . If you have any question, please don't hesitate to inquire us, we will provide you professional solutions.

Certificate: