Home  >  Construction Machinery  >  Engineering & Construction Machinery  >  Concrete Machinery  >  Concrete Pumps

Stationary Concrete Placing Boom, 1.Max Placing Radius:27.7 M, 2.360 slewing fully with hydraulic control, 3.Motor power: 11KW - details see: https://www.machineto.com/stationary-concrete-placing-boom-hg28m-10092766

Stationary Concrete Placing Boom (HG28M)

We(TRUEMAX)are the only manufacture of CPB(Concrete Placing Boom) in China, which developed a complete series of this production including climbing type, mobile type, mechanical type and Lattice Tower type from 10m to 51m working radius.

1.Working Range:

2.Main Components

No.	Component	Remark
1	Boom assembly	Includes 3 arms, hydraulic cylinder and four-bar linkage. The big arm is divided into two segments. The root of the big arm is connected with the swivel table
2	Platform of boom
3	Swivel table	Specially designed working platform where hydraulic pump and electrical control cabinet are set on.
4	Slewing ring support
5	Lower-support
6	Working platform
7	Hydraulic control system	Includes hydraulic pump, manifold valve block,all kinds of valves, hoses and steel pipes.
8	Tubular column assembly	Tubular column assembly is divided into upper-tubular column and lower- tubular column. The working platform is fixed on the upper-tubular section.
9	Electrical system	Mainly includes electrical control cabinet, operating device, and main power cable and sword-switch box.
10	Climbing device	The climbing device mainly is made up of 3 sets of climbing frames, 2 hydraulic cylinders and 2 long pins.
11	Cruciform base template
12	Concrete foundation

Container Loading:

One set HG28M can be shipped by 1*40Hc+1*20Gp.

3.Technical Feature

u The machine is fully driven by hydraulic and can slew 360°

u The balance valves areproducts of oil control Company from Italy

u The solenoid directional valves are products of Rexroth or ATOS

u The main electronic components are products of Omron or Schneider

u Operation can be radio remote control and cable remote control

Main Configuration:

No.	Name	Brand	Country
1	Solenoid Directional Valve	Rexroth/Atos	Germany/Italy
2	Twin Throttle Check Valve	Rexroth/Atos	Germany/Italy
3	Pressure Relief Valve	Rexroth/Atos	Germany/Italy
4	Slewing Cushion Valve	Oil Control	Italy
5	Balance Valve	Oil Control	Italy
6	Oil Pump		China
7	Hydraulic Hose	MaNuLi	Italy
8	Joint	EMC	U.S.A
9	Cable Remote Controller		China
10	Radio Remote Controller		Taiwan

Option:

u Inner-climbing frames: Floor frames or Wall frames(Shaft frames)

u Column: 2m-10m.

u Mode of slewing: Gear slewing or rack & Bearing of stepless slewing.

u Voltage: 380V/50Hz or 440V/60Hz

u Radio remote Control: Tele Crane HBC or AUTEC

4. Parameters

Model		HG28M
Delivery pipe dimension (outside diameter×thickness) JJ83 (mm)		Φ134×4
Delivery hose dimension (inside diameter×length) (mm)		5″×3000
Radius of placing boom(m)		27.7
Stationary height(to the join between the end of the boom and Swivel table) (m)		22.9
Three hydraulic foldable arms (m)	1st section	10.5
	2nd section	9.2
	3rd section	8.0
Boom articulation(°)	1st section	-4.2~+82.5
	2nd section	0~180
	3rd section	0~180
Slewing range(°)		360
Power of motor(KW)		11
Pressure of hydraulic system (MPa)		28
Type of hydraulic oil		ESSONUTO H46
Interval of climbing frame	climbing	3.0~4.2
	Placing concrete/resting	6.0~8.4
Mode of operation		Cable Remote Control
		Radio Remote Control
Power		380V/50Hz
Wind speed km/h	Placing concrete	≤60
	Climbing	≤28
Working temperature (°C)		0°C ~ 48°C

Inner Climbing

5. Approval

CE certification valid till Feb. 2018

6. Project case

Project inAlgeria

Project inDubai