Home  >  Material Handling Equipments & Parts  >  Material Handling Equipment  >  Other Material Handling Equipment

Spiral Conveyor, 1.Self-diagnosis, 2.Can be connected to DCS system, 3.ISO9001product, 4.Weighing accuracy: +/-1% - details see: https://www.machineto.com/spiral-conveyor-for-powder-10199523

Spiral Conveyor For Powder

Power Supply	3 Phase 208-415V 50-60Hz
Charging angle	Standard 45 degree, 30~60 degree are also available.
Charging height	Standard 1.85 meters,1 – 5 M could be designed and manufactured
Remark	Other Charging Capacity could be designed and manufactured
Material	Carbon steel
Material Feature	Heat Resistant
Length of screw conveyor	Variable
Load Capacity	Max. 252 m3/h
Diameter of screw blade	160~800 mm
Rotary speed	20~112 r/min
Conveying capacity	Max. 252 m3/h
Weighing capacity	1~100t/h
Type	Single or double tube
Weighing accuracy	±1%

Product images: Spiral Conveyor For Powder

Introduction:
Spiral Conveyor is a kind of measuring equipment for feeding control, dynamic measuring and continuous conveying bulk material and powder. It can be widely used in building materials, chemical, coal, ports, ceramics, food, and other industries.
Spiral Conveyor has two types:single tube single layer and double tube, double layer. If it is the former, it can realize measurement and conveying at the same time. If it is the latter, the above undertakes steady flow and conveying, and the bottom undertakes measurement and conveying that can have better steady flow effect and save spaces. Besides, the lenghth of the conveyor can be designed according to actual conditions.

Working principle:
When material is conveyed through screw from inlet to outlet, the material weight can be detected by the lode cell on the electrical weighing device under the conveyor and a signal in proportion to the material weight will be generated and transmitted to the controller. Meanwhile, the speed can be detected by the speed sensor installed on the tail pulley and a signal is also generated and transmitted to the controller. By multiplying the weight signal and the speed signal, the instantaneous flow value and total accumulation can be calculated. The control system compares the actual flow signal with the set flow signal and then regulates the output signal through PID to adjust the feeding speed dynamically and thus to realize the continuous feeding.

Product Features:
1. FB-DMC-01A intelligent controller is adopted
2. Compact structure&steady operation
3. Automatically calibrate and measure system zero
4. With the function of self-diagnosis and can be connected to DCS system
5. set all kinds of parameters by hand.
6. Gravimetric weighing combined with screw convey to realize continuous dynamic measuring.

Customer’s notice:

Each equipments is not standard.

Therefore,we need you to send us specific inquiry.Then we can quote price and detailed information according to your specific technical datas and requirements.

Parameter includes:

1. material name
2. normal feed rate or mini. and max. feed rate(?t/h)
3. material particel size(?mm)
4.material moisture(?%) and temperature(degree)
5. bulk density(?t/m3)