Home  >  Pharmaceutical & Chemical Product Machinery  >  Pharmaceutical Machinery  >  Pharmaceutical Packaging Machines

1)Speed Blister Packing Machine, 2)High Speed High Output, 3)PVC-Alu Blister Packs, 4)Suitable for tablets capsules lozenges - details see: https://www.machineto.com/speed-blister-packing-machine-10308233

FEATURES

ØHIGH SPEED, HIGH PRODUCTION, COST EFFECTIVE

ØCOMBI PACKSfor better utilization of capacity and packaging materials

ØEDGE – TO – EDGE CUTTINGto eliminate trim waste between packs

ØSPECIAL TOOL DESIGNreduces trim waste

ØCONTINUOUS BLISTER FORMINGat low temperature by contact heating system

ØALL CHANGE OVER PARTSand adjustments accessible FROM FRONT SIDE

ØEASY AND QUICK CHANGE OVERreduces material wastage and down time

ØSIMPLER OPERATIONReduces operator fatigue – increases output

ØCOMPACT– occupies less floor space

ØBUILT-IN WATER CHILLERfacilitates easier operation

ØEXTENDED GUIDE TRACKcan accommodate upto four feeders to produce multi-product kit packs

• BLISTRIP - Ixtand BLISTRIP - IIare automatic blisterpacking machines mainly utilised for packing of smaller and regular shaped solid articles such as pharmaceutical tablets, capsules, dragees etc., in blister packs.
• The Blister Forming, Product Feeding and Sealing operations are continuous by rotary motion while the indexing and punching operations are of intermittent reciprocating motion.
• The output capacity of the machine depends on the product characteristics and thus on the type of feeding device. In case of slightly curved or flat tablets upto 10mm dia an output of 150 packs per minute for BLISTRIP - Ixtor 300 packs per minute for BLISTRIP - II can be optimally achieved.
• The packing materials namely PVC film and the lidding material namely Aluminum foil (or Glassine Paper foil) with heat sealable VMCH lacquer are required for blister packing and are drawn off from reel stock.
• The blister packs which are punched out from main web can either be collected in bins or transferred over a conveyor belt for further handling.
• The trim waste is sheared off in small pieces to allow easy disposal.

TECHNICAL SPECIFICATIONS:

		BLISTRIP-Ixt	BLISTRIP-II
BASE MATERIAL: MAX WIDTH: (PVC / PVC-PVDC / PE-PVDC) 0.2 TO .3 THICK; IN REEL FORM MAX. Æ440.		148	210
LIDDING MATERIAL : MAX. WIDTH : (HSL COATED HARD ALU / GLASSINE FOIL) 0.02 TO 0.04 THICK; IN REEL FORM MAX. Æ220.		144	206
MAX. PACK SIZE : (1 UP) (2 UP) (3 UP)		110 x 140 110 x 68 110 x 43	110 x 202 110 x 100 110 x 64
MIN. PACK SIZE :		25 x 45 (1 UP)	25 x 45 (1 UP)
MAX. FORMING DEPTH:		10 (EXTENDABLE TO 20)	10 (EXTENDABLE TO 20)
MAX. WEB SPEED :		5 METERS / MIN.	5 METERS / MIN.
MAX. OUTPUT* : PACKS / MIN :		150 (1 UP) 250 (2 UP)	250 (2 UP) 350 (3 UP)
MAX. STROKES / MIN :		150	150
COMPRESSED AIR PRESSURE (BAR)		6	6
AIR CONSUMPTION (LIT / MIN)		200	350
ELECTRICAL POWER CONNECTION DETAILS :		440 V, 3PH, AC, +N, +EARTH (OTHER VOLTAGE ON REQU.)	440 V, 3PH, AC, +N, +EARTH (OTHER VOLTAGE ON REQU.)
POWER CONSUMPTION : PEAK : AVERAGE :		6 Kw 3 Kw	7.5 Kw 5 Kw
CHILLED WATER REQUIREMENT : (18° TO 20° C) AT 3 BAR PRESSURE		120 LIT / HR.	120 LIT / HR.
NET WEIGHT Kg.		1,200	1,700
GROSS WEIGHT Kg.		1,600	2,400
CASE DIMENSIONS :		2400 x 1270 x 1930 (H)	3430 x 1400 x 1930 (H)

ALL DIMENSIONS ARE IN MM.

*Output depends on pack size, pack configuration, product size & shape, product characteristics etc.