Home  >  Construction Machinery  >  Engineering & Construction Machinery  >  Hoists

1mini electric hoist winch, 2.speed: 16m/min, 22m/min, 3.voltage:380v/220v/110v/240V, 4.small electric winch 220v, 5. Escrow pay - details see: https://www.machineto.com/small-jm-jk-2t-2000kgs-220v-mini-electric-hoist-winch-10197448

one type winch Structure diagram

Common mini electric hoist winch types, JK rapid winch and JM low speed winch, tension tonnage according to your need to choose,following listed several kinds of commonly used models for your reference,we also can customized winch meet your speical demands .attach some JM types winch photos.

other types like JM 15-30T,30-50T,also JK series ,JK 0.5T,JK1T,JK 2T,JK3T ,ans so on ,contact me get further details

The major technical parameters for the mini electric hoist winch

Model		JK 2	JK 2	JM 2
Rated tensile force for steel wire rope (kN)		20	20	20
Total transmission ratio (i)		48.57	40.17	71.2
Winch drum	Diameter x length	Φ219x492	Φ219x492	Φ219x492
	Rotational speed (r/min)	28.64	35.8	20.25
	Attached steel wire rope length (m)	80	80	80
Steel wire rope	Specification	6x19	6x19	6x19
	Diameter (mm)	Φ11	Φ11	Φ11
	Average lifting speed(m/min)	25	30	16
Electric motor	Type	Y132M-4	Y160M-4	Y132M-4
	Power (kW)	7.5	11	7.5
	Rotational speed (r/min)	1440	1440	1440
Brake model		TJ2-200	TJ2-200	TJ2-200
Dimensions (LxWxH)mm		1160x960x530	1160x960x530	1150x960x50
Total winch quantity (kg)		480	500	460

if you need other type technicalparameters,ple tell me ,we have detailed parameters of every kinds types

winch operation application and maintenance

mainly used in winding, pull, push, drag heavy objects. Such as all kinds of large and medium-sized concrete, steel structure and mechanical equipment installation and hoist disassembly. Its structure is characterized by wire rope are arranged orderly, crane installation and reliable, applicable to the wharf, bridge, port, etc. Road and bridge engineering and large industrial equipment installation. Is a way to use external forces (such as motor) drive his operation, and then through the electromagnetic brake and lock brake control its not free running under no power, at the same time after the drive of the motor slowdown, drive a running wheel, wheel can roll of wire rope or other things. Usually widely used in mining, metallurgy, lifting, construction, chemical industry, bridge, water and electricity installation, such as lifting.

Operation and Maintenance

1. Make sure to check every fastening screw before using the winch and open the gear box to add a proper quantity of the HJ-50# gear lubrication oil at the same time. Then operate the machine without any objects lifting to make the oil spread to all the bearings and gears and after that the winch can run to lift objects. The lubrication oil should be renewed every 2 to 3 months and be supplied in time.

2. The low distance trial lifting should be made before elevating goods in order to inspect whether the brake is too tightened or loose. If there is some problems for the brake, make sure to adjust the brake lever screw. The winch is forbidden to suspend in high position for a long time after finishing lifting the goods.

3. Check the ground connection condition before supplying the power in case that electric shock occurs. Cut off the main power when the work finishes.

4. If there is some oil material on the brake pad which decreases the braking function, dry powder (such as dry limestone powder) can be used to recover the brake

5. Check the fastening parts timely to avoid some loose connection which may affect the safety of the winch

6. It is forbidden to clean or to add oil when the machine starts. People are not allowed to stand before the machine or under the goods. Pay attention to the rotation of the machine and keep the transmission parts in good lubrication

7. The steel wire rope winding on the drum should not be less than 3 laps.

8. The winch can only be used to lift goods but not for people.

9. The winch using should not be over its rated pulling force otherwise the user should bear the consequences by themselves.

10. The winch installation must be firm and stable, and the ground should be horizontal and flat.

11. When using the winch motor, cam switch and adjusting resistor can’t be used as speed changing switch but only for the start buffering which is also forbidden to put on the start position for a long time, otherwise the adjusting resistor and the electric motor may be burned down.

Safety Instruction

our cooperation customer