Home  >  Chemical Process Machinery  >  Mixing Equipment

No dead angle, no pollution, no residual, Meet the GMP standard, Short mixing time, high uniform mixing, Running steady - details see: https://www.machineto.com/small-3d-powder-mixer-10298351

SBH-10 Three-dimensional Motion Mixer

Please ask me for the manual and operation video if you need it!

♦Introduction♦

SBH series are new type mixer machine that widely used in the pharmaceutical, chemical, light industry, foodstuff and scientific research units and so on. It is suitable for mixing the good fluidity powder or granular materials.

♦Working Priciple♦

During runing, as the mixing vat is able to make multidirectional operation that can speed up the flowing and diffusing actions of materials. It also can avoid gravity segregation or accumulation phenomenon of general mixers caused by centrifugal action. Therefore, this machine has favorable mixing efficiency.

♦Structure♦

1.As the mixing vat is able to make multidirectional operation, there are more mixing points that bring favorable mixing efficiency. The mixing homogeneity is much higher than that of general mixer, drug homogeneity error is lower than that of general mixer. Meanwhile, the max charging volume of SBH series three dimensional motion mixer is one time higher than that of general mixer (max charging volume of general mixer is 40% of full barrel volume).

2. With unique design of mixing vat, inner wall of vat is fine polished, no dead angle, no pollution, and the materials will be discharged automatically under gravity function without any residual, with advantages of pollution-free, residual-free, and easy to discharge and clean.
3. The materials are mixed under sealed; it would not pollute the environment.

♦Operation Principle♦

1. This machine adopts electromagnetci speed (or inverter for adjusting speed). Before starting the machine, connect the main power, the power indicator light, press motor button, then turn on the on and off switch of control panel (the inverter can press the touch button), indicator light, then gradually adjust the mixing speed.

2. If user want to set the mixing time, you should formulate the content on the contract, and our factory can install the time relay, so that the user can set the mixing time according to the materials.

3. After finish mixing, turn off the machine according to the opposite sequence of turing on machine, if you find the discharging is not ideal, you can press the inching button to achive the requirements.

♦Precautions♦

1. As the machine adopt three-dimensional mixing, user should install protective cage around the machine, so as to avoid accidents. Before start the machine, worker should not stand before the vat so as to make sure personal safety.

2. When assemble and dissassemble the machine, should stop the machine so as to avoid the electric break down, and cause accidents.

3. During running, if you find abnormal conditions, should stop the machine and check it, you can not start the machine until solve the fault.

4. You should regularly add lubricant and grease lubricant on drive parts once three month.

5. The feedback button and speed regulating button of operation panel should not be randomly changed, they have already been adjusted before the leave factory.

♦Main Technical Parameters♦

Spec. SBH-	Volume of mixing vat (L)	Max. charging volume (L)	Max. charging weight (kg)	Rotary speed of main shaft (r/min)	Power(kw)	Weight(kg)
10	10	7	8	0-12	0.55	120
20	25	20	15	0-12	0.55	150
50	60	50	25	0-12	1.5	300
100	130	100	50	0-12	2.2	700
200	250	200	100	0-12	4	1500
300	280	300	150	0-12	4	1600

♦Pictures♦

♦Payment Methods♦

These payments of T/T, L/C, Western Union, MoneyGram,Visa Card etc. are accepted. If you have any problem with the payment, please leave a message to us.

♦Logistics♦

DHL, EMS and UPS, Fedex are our choices. If you prefer other reliable shipping company. Please leave a message to us.

♦Tracking Number♦

Tracking number will be informed within 2-3 work days after delivery goods. If you have any problem with it, please leave a message to us.

♦Feedback♦

Any comments, suggestions are accepted. We will be very grateful to your positive footprints left in our company. If you have any problem with our products, please leave a message to us.

♦Refund♦

Any damage or shortage of our goods when you receive your items. Please take some photos for a witness. We will deal with it in 24 hours. Frequently, we will send a new part of items for alternative and heavy-damage, Before refund is accepted, please leave a message to us.