SLIPFORM PAVER

The technology of 1220MAXI-PAV slipform paver is imported from American Pro-Hoff Company. - details see: https://www.machineto.com/slipform-paver-10118506

Condition:New

Place of Origin:Hubei China (Mainland)

Brand Name:China Kudat

Model Number:1220MAXI-PAV

The technology of 1220MAXI-PAV slipform paveris imported from American Pro-Hoff Company. Using of this paver can greatly improve paving quality and speed, therefore, it is widely used to meet the need of concrete pavement construction in our country.

All the components are driven by hydraulic circuits, and the machine travels with two crawlers. Moreover, the automatic driving and leveling control systems are equipped in this machine. When working, the paver can accomplish paving, scraping, vibrating, shaking extruding, shaping at one time. Meanwhile, the road edge can be paved with the edge mould, and the reinforce steel bars can be inserted in the road from either middle or side of the paver.

MAIN TECHNICAL SPECIFICATIONS

Standard paving width	mm	4250
Maximum paving width	mm	8500
Paving thickness	mm	0~350
Paving speed	m/min	0~5
Grade ability	%	At work≥10%; Idle≥15%
Vibration frequency	Hz	0~167
Engine model		Volvo TAD721VE
Rating power	kW	195
Rating rotate speed	r/min	2300
Screw rotate speed	r/min	0~34
Overall weight	t	25
Size	mm	3660×9920×2650

SPECIFICATION Model1220MAXI-PAV TypeSLIPFORM

Main parameters

Maximum paving width 8500 mm

Maximum paving thickness 350mm

Performance

Paving speed 0~5m/min

Flatness (surveyed by 3 meters ruler) ≤3mm

Grade ability At work≥10%; Idle≥15%

Engine

Model TAD721VE

Type 6 firing orders; water-cooling

Power 195kW/2300r/min

Tank capacity 200l

Driving systemthe whole machine is controlled by hydraulic circuits, and the engine is connected with gearbox and three twin pumps, supplying power for many components as Traveling devices, Feeding devices, Vibration, Tamper bar, Body lifting and dropping, Cleaning system and all the executive cylinders.

Traveling devicesconsist of a pump, two valves, a speed control device, two motors and two reducers; The two crawlers are driven by the two reducers; Bearing mode two crawlers bear the weight of the whole machine, and the patch area of every crawler is 3000×320mm

Steeringthe rotate speed and steering of the two motors are controlled by two hydraulic valves, so the purpose of steering without shift can be achieved.

Electrical system24V DC supplied by two batteries is in charge of the whole circuit.

Control panelall sorts of handles are mounted on the control panel severely so as to be operated conveniently; the operator can observe the operating modes of all the components easily through fore-and-aft routeways .

Servomechanisma steering sensor and four grade sensors are equipped to adjust the body carriage and automatic steering automatically according to line transect.

Working devices

1. Crown pan basic width……………………4250 mm

2. Vibrators frequency……………………0~167 Hz

3. Tamper bar rotate speed……………………0~170 r/min

4. Screw rotate speed……………………0~34 r/min