Sidewall conveyor belt

Sidewall Conveyor Belt, 1,base belt, 2, sidewall, 3, cleat - details see: https://www.machineto.com/sidewall-conveyor-belt-10201593

Place of Origin:Shandong China (Mainland)

Brand Name:conveyor

Model Number:sidewall -1

Sidewall conveyor belt

.sidewall conveyor belt Use:

It is fit for conveying materials at a large slope between 0°~ 90°

sidewall conveyor belt Features

By using the high tensile strengh anti-impact conveyor belt,those problems like air blistering,ply separation and longitudinal tear etc,existed in common type of conveyor belt can be solved easily.

In fact,this belt is a high tensile strength anti-impact and longitudinal tear-resistant sidewall conveyor belt.It strength of the base belt of sidewall conveyor belt,the high tensile strength anti-impact conveyor belt raises the impact resistance,the belt itself can bear more load and make the usage more reliable and the service life longer,production efficicency higher,

the baseband:

Corrugated sidewall conveyor belt requires a certain degree of tensile strength and wear resistance. Such as the corrugated sidewall conveyor belt of the remaining empty side, its tape vertical request soft and horizontal requires a certain rigidity in order to meet the requirements of the angle bend. Corrugated sidewall conveyor belt produced by using a special structure which is the lateral rigidity of the baseband, solved the large-sized conveyor belt occurred the phenomenon of collapse during the return trip.

2,Base Belt Structure:

Four Parts: Top cover rubber,bottom cover rubber, Reinforced core,Cross rigid.

Thickness of top cover rubber:3-6 (mm)

Thickness of bottom cover rubber: 1.5-4.5 (mm).

Belt core: Nylon,EP,cotton or steel cord.

The width is the same as normal belt,The standard meets with GB/T7984

3, Diaphragm

Cleat types:T,TS,C,TC and TCS

The cleat is made of enforced fabric,solid,anti-shock to avoid distortion.

“TS”and “TCS”cleats are normally used up to 40°,“TC”and “TCS”are normally used from 40°to 90°.

Sidewall,cleat and base belt are joined through hot vulcanization.

Cleats and sidewalls are joined through bolt to prevent leakage of material.