servo motor motion driver for Printing and packaging machine

1. ac servo motor driver, 2. Single phase 220V 50 or 60Hz, 3. Modbus Interfaces, 4. USB PC Interfaces, 5. Passed QC - details see: https://www.machineto.com/servo-motor-motion-driver-for-printing-and-packaging-machine-10235336

Place of Origin:Hubei China (Mainland)	Brand Name:Maxsine	Model Number:EP3-GL1A0	Motor Type:AC Motor
Output power:1 phase 220V AC	Rated output Power::0.1kw	Control Mode:Position, Speed, Torque	Rated output current::1.0A
Feedback Mode:2500 line incremental encoder or 17 bit absolute encoder	Protection Level:IP20	Regenerative Braking:Built-in/built-out	Certification:ISO
Control method:Vector Control	Special Functions:ZRN ,Gain Switch,Sustaining Modbus Agreement

About us

All-digital AC servo motor motion control driver and servo motor have been researched for 20 year and been produced for 10 years by us. It is believed that good quality products and service could be offered for you.

About this product

A.Introduction

Designed and produced by market demand, EP3 series Multifunctional AC Servo motor motion control driver adopts advanced control algorithm and intelligent power module (IPM), which could realize precise digital control on torque speed and position. Designed on the basis of EP2 series, functions of USB Interfaces , sustaining Modbus agreement and internal simple PLC are added. This series includes 3-phrase 220V series and 3-phrase 380V series. The feedback mode is 2500 line incremental encoder or 17 bit absolute encoder, which could support 16 bit current sampling and 16 bit external analogue sampling accuracy. Thus, it owns advantages of strong overload capacity, fast response, easy operation without setting driver code. The selected exquisite operation panel could do the realtime monitor and adjust the operating situation of motors. Designed on the reliability requirement of domestic industrial environment, it helps to make the stability of products reliable.

B.New function

a. Position control mode

b. Simulation command control

c. Resonance inhibition

d. PLC Function

e. Defensive function

f. Modbus Interfaces

g. USB PC Interfaces

h. Signal output of Encoder

C. Features

a. realize precise digital control on torque speed and position

b. support 16 bit current sampling and 16 bit external analogue sampling accuracy

c. strong overload capacity, fast response, easy operation without setting driver code

D. Scope of application

a. CNC industry

b. Textile industry

c. Printing and packaging industry

d. Robot industry

e. Mechanical spring machine industry

f. Paper making industry

g. Industrial spring machine

E. Main Markets

a. Asia

b. Europe

c. Middle East

d. South America

e. North America

f. Oceania

g. Africa

F.Technical parameters

Model

GL 1A0

GL 3A0

GL 7A5

GL 120

GL 160

GL 190

GL 240

GH3A5

GH 5A4

GH 8A5

GH 130

GH 170

Rated output Power(kW)

0.1

0.4

1.5

Rated output current(A)

7.5

3.5

5.4

8.5

Input power

Main supply

1-phase 220VAC -15%~+10% 50/60Hz

3-phase 220VAC -15% +10% 50/60Hz

3-phase 380VAC -15%~+10% 50/60Hz

Control supply

1-phase 220VAC-15%~+10% 50/60Hz

24VDC±15% ≥1.5A

Environment

Temperature

Working:0°C~ 40°C Storing:-40°C~ 50°C

Humidity

Working:40% ~ 80%(non condensing) Storing:under 93%(non condensing )

Atmospheric Pressure

86kPa ~ 106 kPa

Protection Level

IP20

Control Mode

vector control

Regenerative Braking

Built-in/built-out

built-out

Feedback Mode

2500 line incremental encoder or 17 bit absolute encoder

Control Mode

Position, speed, torque, position/ speed,speed/torque,position/torque

Digital input

5 Programmable input terminals(Optical Isolation)

Digital Output

3 Programmable input terminals(Optical Isolation)

Position

Input Frequency

differential input:≤500kHz(kpps), single-ended input:≤200kHz(kpps)

instruction mode

Pulse+Signal,CCW Pulse/CW Pulse, Two-phase A/ orthogonal Pulse

Electronic Gear Ratio

1 ~ 32767/1 ~ 32767

Speed

Simulation command input

-10V ~ +10V,input impedance10kΩ

Instructions Acceleration And Deceleration

Parameters set

Instructions source

analog,Internal speed instructions

Torque

Simulation command input

-10V ~ +10V,input impedance10kΩ

Speed restriction

Parameters set

Instructions source

analog,Internal torque instructions

Special Functions

ZRN ,Gain switch,mechanical resonance wave trap, sustaining Modbus agreement

Surveillance Function

Revolving Speed,Current Position,Positional Deviation,Motor Torque,Motor Current,Instructions Pulse Frequency etc.

Defensive function

Overspeed,Overvoltage,Overcurrent,Overload,Abnormal brake,Abnormal Encoder,out of tolerance etc.

Feature

Speed Frequency Response

≥300Hz

Speed Fluctuation Rate

<±0.03%(load 0 ~ 100%); <±0.02%(power-15% +10%)

Speed Ratio

3.513889

G. model

H. Size

I. producing and packaging procedure

J. Certifications

a. Quality Management System Certification

b. HI-tech Enterprise certification

c. Patent for Invention: a kind of device and method of alterable encoder output lines

K. Our favorable Service:

a. The fewest MOQ is offered. You can purchase 1 set for testing before you place a big order.We will send samples by express like DHL or Fedex.

b. A variety of special specifications for customized products could be provided for customers with comprehensive solutions.

c. Welcome to visit our company.

d. For more information about our products,please feel free to contact us by email or telephone. Thank you.

QQ: 1765751645

L. product pictures

Packaging Detail:Foam+Plastic bag+Carton,standard export special packagingCarton size is as follows:a. Carton of 1 set: A. 270*240*190mm B. 275*275*210mmb. Carton of 2 sets: 340*240*275mmc. Accessories Bag: A: 285*225*155mm B. 340*240*275mm

Delivery Detail:5~60 days depend on customers' demand