servo motor drive EP100-2A and servo motor

Servo motor driver, 1' 3 phase 220VAC, 2' Pulse or Torque or Speed control, 3' with IPM and DSP, 4' ISO 9001 - details see: https://www.machineto.com/servo-motor-drive-ep100-2a-and-servo-motor-10234842

Place of Origin:Hubei China (Mainland)	Brand Name:Maxsine	Model Number:EP100-2A & 60MSL00630F	Motor Type:AC Motor
Regenerative Braking:Built-in/built-out	Certification:ISO	Feedback Pulse:2500 Line/turn	Electronic Gear Ratio:1-32767/1-32767
Control Mode:Position, Speed, Torque	Match Motor:60MSL00630F

servo motor drive EP100-2A and servo motor

contact supplier for servo motor drive EP100-2A and servo motor

Maxsine Products

All-digital AC Servo Driver:

1' Model series:EP100 series, EP1 series, EP1C series, EP2 series, EP3 series;

2' Power range:currently covers power range from 50w to 5.5 kw.

Permanent Magnet AC Servo Motor:

1' Model series:40 series, 60 series, 80 series, 110 series, 130 series, 150 series, 180 series;

2' Power range:currently covers torque from 0.6 Nm to 35 Nm and power from 50w to 5.5 kw.

Product Introduction

1'Servo driver models

EP100-2A, EP100B-2A, EP100-3A, EP100B-3A, EP100-5A

EP100 series AC Servo Driver is the earliest series promoted into the market with high performance, intelligentization, high reliability and highgrade digital ac servo system of small volume. This series adopts specialized DSP (Digital Signal Processor), IPM (Intelligent Power Module), and advanced control algorithm, which could realize precise digital control on torque, speed and position. The selected exquisite operation panel could do the realtime monitor and adjust the operating situation of motors.

2'Introduction of EP100 series models

3'Introduction of EP100 Size

4'Introduction of EP100 Specification

Model		EP100(B)-2A	EP100(B)-3A		EP100-5A
Input Power		3-phase AC220V -15% ~ +10% 50/60Hz
Environment	Temperature	Working:0°C~ 40°C Storing:-40°C~50°C
	Humidity	40% ~80%(non condensing ) Storing:under 93%(non condensing )
	Atmospheric Pressure	86kPa ~ 106 kPa
Protection Level		IP20
Regenerative Braking		Built-in
Control Mode		EP100 series		Position,Speed, Torque
		EP100B series		Position
Digital Input		1.SRV-ON 2.A-CLR 3.CCW Drive Inhibition 4.CW Drive Inhibition 5.Deviation CL/Speed Selection 1/ ZEROSPD 6.Instructions Pulse Inhibition/Speed Selection2 7.CCW Torque Limitation 8.CW Torque Limitation
Digital Output		1.Servo Ready Output 2.Servo Alarm Output 3.Finish Orientation Output/Reach Speed Output 4.Mechanical Brake Output
Position	Input Mode	Pulse+Signal, CCW Pulse/CW Pulse,Two-phase A/ orthogonal Pulse
	Electronic Gear Ratio	1~32767/1~32767
	Feedback Pulse	2500 Line/turn
Torque	Analog Instructions Input	-10V ~ +10V,Input Impedance10kΩ
	Rate Limitation	Parameter Setting
	Instructions Source	Analog,Internal Torque Instructions
Speed		4 kinds Internal Speed/Analog Control
Acceleration and Deceleration Function		Parameter Setting 1~10000ms
Surveillance Function		Revolving Speed,Current Position,Instructions Pulse Accumulation,Positional Deviation,Motor Torque,Motor Current,Straight-line Speed,Rotor Absolute Position,Instructions Pulse Frequency,Running State,Input and Output Terminal Signals etc.
Protection Function		Overspeed,Overvoltage, Undervoltage,Overcurrent,Overload,Abnormal Brake of main Power,Abnormal Encoder,Abnormal Control Power Supply,out of tolerance etc.
Feature	Speed Frequency Response	≥250Hz
	Speed Fluctuation Rate	<±0.03%(Load 0 ~ 100%); <±0.02%(Power -15% +10%)(parameters agree with rated speed)
	Speed Ratio	3.513889

5'Introduction of Servo Motor 60MSL00630F

Name	Servo Motor 60MSL00630F
Model	60MSL00630F
Rated Power	200w
Rated Line Voltage	3 phase 220VAC
Rated Line Current	1.5A
Rated Speed	3000rpm
Rated Torque	0.637Nm
Peak Torque	1.911Nm
Rotor Inertia	0.17*10^-4kg·m²
Lines of Encoder	2500ppr
Motor Insulation Class	ClassB(130°C)
Protection Level	IP64
Operating Environment	Temperature: -20°C ~ +50°C; humidity: relative humidity (RH)<90% (not including condensing condition)