Home  >  Industrial Supplies  >  Motor Parts  >  Motor Controller

servo motor controller/DC servo motor control system, Series 110 AC 40----110V, Series 220 AC50---- 220V, 10A 20A - details see: https://www.machineto.com/servo-motor-controller-dc-servo-motor-control-system-10234303

Servo motor controller/DC servo motor control system

Overview

The servo drive adopts all-round protection design and has efficient transmission functions: high control precision, good line shape,

stable and reliable operation, quick response time and complete isolation control and other features.

It has high torque and fine performance especially at lower revolution speed. Compared with AC brushless servo,

its excellent characteristics can show more in certain occasions and is widely applied to various transmission mechanical equipments.

Product Characteristics

PWM (pulse width modulation) H bridge driving

Four quadrant working mode

Complete isolation design

Fine output line High control precision

Small zero drift

Selectable voltage grade of rotational speed feedback

Standard signal interface input 0--±10V

Reversing function of switch value

Lock function of motor at zero signal

Protective function of upper/lower limit position

Enabling control

Setting of higher and lower speed limit

Setting function of output current

Protection or alarming in such circumstances as overvoltage, overcurrent,

short circuit, excessive temperature, abnormal feedback, etc.

Main Parameters

Control power voltage AC:

Series 110 AC 110V±10%

Series 220 AC 220V±10%

Main power voltage AC

Series 110 AC 40----110V

Series 220 AC50---- 220V

Output voltage DC

Series 110 0130V or other voltage can be set

Series 220 0230V or other voltage can be set

Rated output current: DC 5AMaximum output current 10A

DC 10AMaximum output current 15A

DC 20AMaximum output current 25A

Output Voltage Accuracy0.1%

Given input signal 0±10V

Speed feedback voltage

7V/1000R 9.5V/1000R

13.5V/1000R 20V/1000R

Can be chosen via film threading in PC board and other specification setting is acceptable.

Requirement of Installation Environment

Environmental temperature-5ºC ~ +50ºC

Environmental temperatureRelative humidity≤80RH (without dew)

Avoid environment with corrosive gas and flammable gas

Avoid occasions with dust and conductive electrical dust

Prevent water, oil and other liquid entering the interior of drive

Avoid using in shaking and striking circumstances

Avoid using on occasions with inadequate ventilation