Home  >  Industrial Supplies  >  Filter Supplies  >  Other Filter Supplies

Sand blast cabinet dust collector:, 1. good quality filter paper ., 2.make sure the filter cartridgesaa lifetime>2 years - details see: https://www.machineto.com/sandblasting-dust-collector-with-pulse-blow-back-device-10219565

Dust Collector Brief Introduction:

Dust remover system consists ofpulse jet cartridge filter, blower, air duct ,etc. Dust collector and fan installed in the workshop outside,in order to avoid the fan is affected by noise.

High-efficiency filter dust collector with filter cartridge type and pulse blow-back device, the brand of filter cartridge is Donaldson. The material of filter is wood pulp.Filter paper is made from American AV company. We can make sure the filter cartridges’ lifetime>2 years.It consists of112 filter cartridgeswith settlement structure, whose replacement is very convenient. Its dust-removing efficiency could reach max. 99.5%, and emission concentration of dust≤80mg/m3, which is up to international environmental protection requirement and meets the Integrated Emission Standard of Air Pollutants GB16297-1996.

The filter cartridge is structured as a folded round one, with outer diameter 324mm,inner diameter 215mm, height 750mm. A standard filter cartridge is about 14.5 m2 with a total filtering area more than 1624m2. It is designed as a standard structure which makes assemble and disassemble easily. The pulse blow-back pressure is 0.5~0.6Mpa, high quality blow-back valve is adopted to ensure faultless operation which can guarantee 200,000 trouble-free. The pulse blow-back is automatically controlled by a special controller which is more reliable and convenient compared with normal pulse ordinary system.

Specification:

Exhaust capacity	50000 m3/hour
Total pressure	2167 Pa
Filtration Area	1656 m2
No. of Cartridge filter	112 Pcs
No of Solenoid Pulse Valve	28 Pcs
Air to Cloth Ratio	0.51 m/min
Pressure Loss	1100 Pa
Depurative Density	99.5% (1μm)
Air Pressure	0.4~0.6 Mpa
Noise	≤85 dB
Air Consumption	1.4 m3/min
Dimension	L 11300mm x W 2100mm x H2500mm
Weight	5500Kg
Fan’s model	4-72NO12C
Revolving speed	1000r/ min
Power	45KW

Characteristics:

1. It adopts filter duster which is of high filter precision and high quality dedusting result.

2. It can be installed beside the shot blasting machine which enjoys convenient repair.

3. In the inlet air of dust remover,primary separator is designed which can protect the filter cartridge from the slashing of steel shots in the pipe so as to prolong its life-span.

4. It enjoys perfect dedusting effect. When it works, no visible dust blow off from air outlet.