Home  >  Raw Material Processing Machinery  >  Rubber Raw Material Machinery

1.Patented transmission sys. 2.Hardened gear reducer 3.Easy maintain - details see: https://www.machineto.com/rubber-machine-open-mixing-mill-patented-10340153

1.Patented transmission sys. 2.Hardened gear reducer 3.Easy maintain

Open mixing Mill

Brief Introduction and Working Principle of the Openmixing Mill

• The machine mainly uses two rollers with a certain amount of heat and relative rotation movement for the mixing plastication of the raw materials used in the plastic products.
• The raw materials are added on the working surfaces of the two rollers in operation; due to the different revolving speeds of the two relatively rotated rollers, the temperature of the working surface is also slightly different; then the raw materials on the roller surface gradually become soft along with the increasing temperature due to the heat conduction and fiction effect of the roller, stick to the roller surface and rotate with the roller.
  
• When these raw materials enter into the gap on the working surface of two rollers, due to the small gap between the roller surfaces, and the revolving speeds on the two roller surfaces are different, the materials suffer from the strong extrusion, shear, and kneading action; due to the complex motion among the raw materials, the raw material produces a certain amount of friction heat in itself; in addition, the surface of the roller also has the conductive heat.
• Due to the combined action between these internal factors and external conditions, the raw materials on the roller become softened and in mixed plasticization and molten state; in addition, the operator will constantly stir up the raw materials among the rollers, so that the raw materials can be mixed and plasticized uniformly. At the moment, the raw materials can be delivered to the calendar and rolled into the products.

Contrast on the advantages of the open mill

XinHuaQing Patented Technology	Old Technology
Based on the push back drive style,the stress direction of the output shaft support of the reducer have been changed. The output shaft is hard to loose, thus the service life of whole machine have been greatly extended.Consequently,the maintain cost are decreased	Based on the down stroke drive style , the output shaft is easy to loose, cause the teeth on big and small driving gears are mashing in partial,the shaft and the shell of the reducer are quite easy broken.Once the problem happend, it is hard to make the machine in the normal performance state.
XinHuaQing Innovated Technology	Old Technology
One big and small geared driving system was abandoned. Instead,the harden surface gear,rolling bearing consist of triple geared driving system are introduced,to ensure the service life of the machine are greatly extended.	One big and small geared driving system was abandoned,with the planetary geared reducer, the gears are vulnerable

Pls contact us for more details

Contact: George Qian

Office Phone: 0086 532 8613 3177

Fax Number: 0086 532 8113 3327

Mobilephone: 0086 185 6162 6517