Home  >  Industrial Supplies  >  Evaporator

1.high durability,more practical application, 2.more stable evaporation, 3.no noise, 4.anti-corrosion - details see: https://www.machineto.com/rotary-vacuum-evaporator-10215388

Principle

In the condition of vacuum,keep constant heating on the rotary evaporator,at the same time keep the rotating bottle

uniform rotation,so the materials in the evaporator would form a large area of film in the wall of the bottle,then the

materials would evaporate efficiencily and turn into steam,which condensate in glass condenser,the condensation

would enter the collection bottle.

Main points introduction:

1.Cooler: vertical, inclined, Cold trap type, fine quality high temperature glass double standard port back to the

integration with standard condenser collected bottles , easy to configure.

2.Feeder: Valve type feeding tube PTFE tube sockets, pipes and block the flow ofPTFElaps.

3.Seal: PTFE Viton gasket vacuum

4. Rocker plate Button: Rocker panel hosts subordinates pressure rise, Rocker subordinates under pressure host decline.

5. screw cap : smooth rotation automatically fasten spin the bottle, the inverse spin fast shirk spin the bottle.

6. stepless with knob.

7. the host body alignment angle: Loosen or tighten the Knob.

8.Host body of stainless steel, rust proof aluminum, special engineering plastics, compact structure, attractive appearance,

durable, and practical.

9. Equipped with air duct cooling device.

The details of rotary evaporator

Work with low tempreture cooling liquid circulating pump and vacuum pump

Technical parameters
1.Temperature range: automatic temperature control, digital display

Water bath: RT-99 °C; oil bath: RT-180°C

2.Bath Accuracy: ± 1 °C, oil bath Accuracy :: ± 3 °C,Water bathand oil bath dual-use ;

3.8 liter capacity water bath range available 3000ML-5000ML flask.
4.Rocker plate electric lift, fast automatic lifting,0-150 mm
5. Evaporation flask speed:0-200 r / min, power 40W

7.Rotary bottle capacity: 3L 5L 10L 20L 30L 50L

Features

1.Transparent shield, insulation,energy saving, explosion-proof, splash-proof, rust-proof, anti-pollution,improve safety performance.
2.Teflon composite pot, temperature controlled, digital bath temperature.
3.Teflon aluminum shield, insulation splash.

R series Ordering information

Model	R201D	R301	RE2000A	R501	R1002	R2003	R3002	R5003	RE6000
Rotary bottle capacity (L)	2	3	1-2	5	10	20	30	50	6
Collection bottle capacity(L)	1	1	1	2	5	10	20	20	3

RE series ordering information

Model	Specifications	main performance
RE-2000A	0.5-2L milling Condenser, speed digital	Electronic variable speed 0-200 r / min. Hosts power: 40W. Rocker plate buttons fast automatic lift 0-150mm. Teflon composite pan fully enclosed heater, power 1.4KW. Automatic temperature control 0-90 °C
RE-2000B	0.5-2 L milling Condenser
RE-2000C	0.5-3 L horizontal condenser
RE-2000D	0.5-3 L trap type condenser

Model	Capacity (L)	Features
RE-52AA	0.5-2	Automatic lift, temperature display
RE-52A		Manual lift, temperature display
RE-52
RE-5299		Automatic lift, temperature display
RE-52B
RE-5286A		Conjoined Vertical
RE-5285A	0.25-2	Horizontal condenser, hand wheel lift, electronic speed control, without a water bath
RE-52CS-1		Vertical condenser, lift lever, electronic speed control, with 260 water bath
RE-52CS=2		Horizontal
RE-52CS		with 220 water bath
RE-52C		Vertical condenser
RE-5298-A	3	Conjoined Vertical,Automatic lift
RE-5298		Automatic lift
RE-5205	5	valve type
RE-5210A	10	Electric lift, imported inverter
RE-5210		Manual lift
RE-5220	20	Precision tetrafluoroethylene and Fluorine rubber seals. Super large diameter 20000ml flask. Continuous milling,
RE-5250	50	50000ml evaporator flask

Please send email to get latest price!