Replacements Velcon 3 Micron Rated Pleated Paper Cartridges

FG-644A3 pleated media filter cartridges, to API/IP Specification 1590, for Aviation Fuel Microfilters - details see: https://www.machineto.com/replacements-velcon-3-micron-rated-pleated-paper-cartridges-10213030

Place of Origin:Hebei China (Mainland)

Brand Name:SEBO

Model Number:FG-644A3

Cross Part No.:FO-644A3

Replacements Velcon 3 Micron Rated Pleated Paper Cartridges

contact supplier for Replacements Velcon 3 Micron Rated Pleated Paper Cartridges

APPLICATIONS
Pleated Media Cartridges are suitable for a broad range of polar and non-polar fluids.
Recommended for applications where the contaminant is granular (non-colloidal), allowing
maximum utilization of the high surface area.
Suitable for:
All Hydrocarbon Fuels Cutting Oils Glycols Degreasing Fluids
Water Emulsion Coolants Naphtha Lube Oils Ethyl Alcohol
Insulating Oils Toluol Synthetic Oils Hydraulic Oils
SPECIFICATIONS
75 psi Collapse strength Micron ratings from 1/2 to 75
98%+ Nominal filtration efficiency For information about Flow Ratings with various viscosity fluids,
5 - 9 Operating pH range refer to Form #1532
275°F Maximum operating temperature Multi-pass (Beta Ratio) data available on request
FO-656PLF1/2

FO-6xxA3 pleated media filter cartridges
to API/IP Specification 1590, “Specifications and Qualification Procedures
for Aviation Fuel Microfilters.”
• Large Surface Area – Allows high flow rate with low initial pressure drop
and maximum contaminant holding capacity.
• Resin Impregnated Media – Maintains strength, resists effects of
water and heat.
• 75 psi Collapse Strength – Heavy gauge carbon steel endcaps and
center tube give safety margin against pressure surges.
• Coated Steel Components – Resist corrosion from most industrial fluids.
• Corrugated Media – Prevents pleat pinch-off, assuring all filtration media
is utilized.
• Buna-N Gaskets – The best general gasket material available assures
positive seal in most fluids.
• Epoxy Bonding Material – Endcaps epoxy-bonded to media to prevent
internal bypassing.

SPECIFICATIONS
75 psi Collapse strength 5 - 9 Operating pH range
3 micron efficiency (per 1590) 275°F Maximum operating temperature
CARTRIDGE INFORMATION
PERFORATED
MODEL NO. DIMENSIONS OUTER WRAP
FO-614A3 6” x 141
/2”x 31
/2”ID NO
FO-629A3 6” x 29” x 31
/2” ID YES
FO-644A3 6” x 44” x 31
/2” ID YES
FO-656A3 6” x 56” x 31
/2” ID YES