Home  >  Mining & Metallurgy Machinery  >  Mining Machinery  >  Other Mining Machines

Pro-environment palm silk dryer machine-direct selling, palm silk dryer machine, High efficiency, Firm construction, ISO - details see: https://www.machineto.com/pro-environment-palm-silk-dryer-machine-direct-selling-10319345

Pro-environment palm silk dryer machine-direct selling

Working Principle of palm silk dryer machine

palm silk dryer machine contains heat furnace, feeding hole, rotating cylinder,filter cylinder, material conveying pipe, cooling tube and the discharging hole.The rotating cylinder is located in the driving roller which put the rotating cylinder in low speed motion by motor and underdrive conveyor.The feeding hole has been designed between the heat furnace and rotating cylinder, and there are stirring blades inside the rotating cylinder. At connection place between the rotary cylinder and the filter cylinder there is equipped with a damboard on which a small hole is opened. One end of the filter cylinder is linked together with rotating cylinder, the other end is connected with conveying pipe.There also designed stop dogs inside the filter cylinder and slag discharge holes at bottom of the filter cylinder. One end of cooling tube is linked together with the conveying pipe by the blower; and the other end is connected with the discharging hole.

Due to the above structure, raw material can be fully dried in rotating cylinder. And raw material have been scattered sufficiently again before being sent into the material conveying pipe,making the moisture evaporate fast.The stop dogs can block the impurities of raw material, ensuring the quality of the raw material.After being sent into the material conveying tube, in the function of spray wind pipe and rotary cylinder,material can be boiled and fluidized in the cylinder, and get fully contacted with the hot gas and finally complete drying.

Features of palm silk dryer machine

1,strong drying intensity, as the materials are fully scattered in the air,the whole surface area of the materials is the effective drying area.

2,short drying time.

3,simple structure of the blast drier, small floor area,easy to build and repair.

4,large capacity; high thermal efficiency;when drying the unbound water,the thermal efficiency can reach 60%.

5,Air quantity, heating temperature,materials staying time and feeding speed can be adjusted to achieve the best drying effect.

6,The equipment configuration is flexible,mesh belt washing system and materials cooling system can be used.

7,Most air is recycled to realize saving energy.

8,The machine is equipped with unique air dividing apparatus,it makes the hot air distribute uniform better and guarantee the quality of products is constant.

9,Heating source can be steam, conduction oil,electricity,coal (oil), or hot air furnace.

Application of palm silk dryer machine

It can be widely used in the following industries: straw press briquettes fuel, charcoal machinery, wood chip granule fuel, sawdust press blocks, farming and animal husbandry engineering industry; it is able to dry agricultural cellulosic-based materials such as: corn straw, soybean straw, cotton straw, wheat straw, sorghum straw, wood chips, wood shaving, sawdust drying, ginkgo leaf drying and mulberry leaves drying, etc.

It is an ordinary continuous drying equipment,widely used for chemical industry, foodstuff industry, pharmaceutical industry, construction materials industry, electronic industry and so on. Especially it is suitable for drying raw materials that are good in breathability and have the shape of pieces or strip of granule. It is also possible to dry the pasted raw materials such as filter cake after shaped through granulator or extruder.

Technical parameters

Model	The Diameter (mm)	The Length (m)	Slope(°)	Speed (r/min)	Power (kw)	Volume (m3)
0.6×8-12	600	8-12	3-5	8	4	2.26
1.0×10-12	1000	10-12		6.73	5.5	7.85
1.5×12-18	1500	12-18		4.8	15-22	21.2
1.8×12-18	1800	12-18		3.2	185-30	48.22
2.2×12-22	2200	12-22		3	22-30	70.43
2.8×15-24	2800	15-24		2.59	30-55	147.8

Notes

1.The technical parameters above are just for your reference,due to different materials & theirs moisture in order to meet your needs.

2.If there is any change, all parameters and overall dimensions are subject to operating instructions.

3.Any questions please feel free to contact us.

First-rate After-service

1.Provide consultation services for customers, determine operational scales, and provide factory-establishing plans.

2.Freely install, debug, and provide relevant technical training.

3.Strict carry out three guarantees (guaranteed quality, guaranteed quantity and guaranteed repair), and contains technical consultation.

4.Ensure spare parts and components available adequately and timely.

5.The Project Report will be made according to the client's actual requirements.

6.Further business,further discussions.

Main installation introduce

It is one of the main equipment of mineral processing equipment, technical installation requirements, process standards high. Erection work shall be in accordance with the relevant design documents, drawings, standards, rules and regulations, according to the correct installation procedure and the working instruction to carry on the reasonable construction.

Before dryer installed, the first preparation work is the basis acceptance, main check foundation concrete pouring quality and position deviation size......For moredetails please