Home  >  Industrial Supplies  >  Cleaning Equipment Parts

Water air mixing nozzle could adjust the flow rate, Pressure and External Type, Flat fan spray or Full cone spray, Spray fine mi - details see: https://www.machineto.com/pressure-type-water-air-mixing-nozzle-10213138

Pressure Principle

water air mixing nozzle is the most widely used and therefore a large range of capacities and spray patterns are available.Liquid capacity ,air capacity and droplet sizes can be adjusted by regulating the air and liquid feed pressures and the two fluids are mixed inside the water air mixing nozzle prior to be ejected.

Basic Information:
Siphon Type
Thread size: 1/8; 1/4; 1/2
Material: SS; brass
Spray Pattern: Flat fan spray

Design Feature:

1.Pressure Type water air mixing nozzle
Air pressure and liquid pressure both are demanded.

With needle, the flow rate could be adjusted by screwing the needle; or, flow rate could not be adjustable.

2. For pressure type water air mixing nozzle , there are THREE spray pattern:

Flat Fan spray pattern , Round Spray pattern, and wide angle spray pattern.

Flat fan spray's angle is about 70 degree;

Flat Spray:

Round Spray

3.Inner structural design makes liquid and air mix fine, then sprays fine. Normally, we could increase the air pressure or reduce the liquid pressure, so that we could make the water air mixing nozzle sprays more fine droplets( about 30micron).

4.Keeping liquid pressure and air pressure unchanged, as water air mixing nozzle could adjust liquid flow rate, then it also could spray according to your requirement.

Following is the detailed spraying pics of water air mixing nozzle we have tested for your reference: