Home  >  Industrial Supplies  >  Filter Supplies  >  Other Filter Supplies

PP Melt blown Cartridge Filters, 1,High filtration efficiency,, 2,Good chemical compatibility,, 3,99.9% absolute rate. - details see: https://www.machineto.com/pp-melt-blown-cartridge-filters-for-power-plant-water-treatment-10219969

PP Melt blown Cartridge Filters For Power Plant Water Treatment production field

Filter Media	Polypropylene
Length	5",9.75"9.8",10",20",30",40",50" ,60"
Micron Rating	1, 5, 10, 20,30, 50, 75, 100 μm
Inside Diameter	0.8"(20mm), 0.9"(23mm), 1"(26mm), 1.1"(28mm), 1.2"(30mm), 1.3"(33mm), 1.4"(36mm)
Outside Diameter	2.36"(60mm),2.4"(61mm), 2.5"(63mm), 2.55"(65mm)
Core	PP
Gasket/O-ring	Silicone, EPDM, Viton, Teflon encapsulated Viton
End Cap	Flat ,222 O-Ring,226 O-Ring,Fin

Description

PP Melt blown Cartridge Filters are constructed by high technology design that take advantage of flow pattern progressively from surface to inner center. It has significant service life when consistent high filtration efficiency. Manufactured with progressively graded density, the absolute rate of this filter could get to 99.9% and has supernormal dirt holding capacity.

Feature

1, 99.9% filtering efficiency (Beta Ratio: 1000) and exactly precision from 1um to 100 um
2, Exceptional compressive capacity
2, Depth layers strucure ,high contaminant holding capacity and longer filter service life .
3, Made of FDA grade PP material which is environmental protection ,without binders,additives and lubricants .
4, High filtration efficiency,consistent filtration performance
5,Good Chemical compatibility

Application
1,Water treatment
2,PCB industry
3,Pre RO/ID water filtration
4,Chenmicals ,solvents
5,Plating solution
6,Electronic Industry
7,Petrochemical Process
8,Filtering for Food & Beverage

Operation Data

Max. Operating Temperature	60 °C
Max. Differential Pressure	4.0 bar at 20°C 2.0 bar at 60°C 1.0 bar at 60°C
Recommended Change Out Differential Pressure :	2.0 bar (29 psi)