Home  >  Material Handling Equipments & Parts  >  Material Handling Equipment  >  Other Material Handling Equipment

Low energy consumption;, compact structure and covers small areas;, good quality materials,, hard to destroy;, high efficient - details see: https://www.machineto.com/plaster-powder-production-equipment-lines-10198883

New-type gypsum frying boiler- ebullience calciner

1.The Importmant production process of gypsum powder:
The main composition of gypsum is hydrate gypsumCaSO4.2H2O. However, the gypsum powder used in practical production (such as the gypsum powder for gypsum board, for mould, for plastering) is to dry and dewater the dehydrate gypsum, reduce the content of crystallization water in it, so the standard of crystallization of gypsum powder can meet the needs of all kinds of gypsum powder, because it can change into plaster of paris. Plaster of paris can re-integrate with water when it is applied into production, and it can be processed into new type building materials with a high intensity, such as gypsum board, gypsum block, etc.

2.Obviouis Advantages

First grind and second bake. The largest advantage of this technique, compared with that of first bake and second grind, is energy consumption reduction. Large plaster stone shall be ground into powders with diameter less than 0.2mm, which increases the specific surface when calcining, enlarges the contact area with heat medium, improves calcinations heat exchange efficiency and lowers energy consumption greatly. This equipment has small bulk, large production capacity, and simple structure and is hard to destroy.

3.The equipments configuration for ebullience calciner

Daily output(T)	Volume of fluidized furnace(M)	Roots Blower(KW)	Electrostatic precipitation(	Thermal conductivity oil furnace(kcal)	Auxiliary equipment
150	1.3	11	4	200	Hoist, root blower, feeder conveyor, frame body
200	1.4	15	5	300
300	1.6	18.5	6	500
400	2	22	8	600
500	2.4	30	10	800

4.Fastest Contact way: