Home  >  Construction Machinery  >  Engineering & Construction Machinery  >  Road Machinery  >  Asphalt Mixers

1.Capacidad de produccion:60t/h, 2.Potencia total:109.5kw, 3.Certificacion CE, 4.Garantia por un ano, 5.planta movil - details see: https://www.machineto.com/planta-para-mezcla-de-asfalto-en-forma-movil-dhb60-10115263

1. The technique request about productivity

It can be made clear that the productivity of asphalt mixing plant is that under the standard conditions, it must fulfill the requirements as below simultaneously:

(1) Environment temperature: 20°C, standard atmospheric pressure;

(2) The average humidity of Cold aggregate <5%;

(3) The temperature of the hot mixture <160°C;

(4) The mixture is of middle size, the density of stone material≥ 1600kg/m3;

(5) The content of sand material in mixture <35%;

(6) The product capability includes asphalt;

(7) The stone aggregate must accord with the proportion requirements of national technical specifications.

(8) The cold aggregate must be clean, and it shouldn’t include more soil and sundries. The cold aggregate supply should be continuous.

(9) The cold aggregate shouldn’t include large quantity of oversize grain; otherwise it will cause jam and reduce the aggregate supply capability.

(10)The asphalt should be with well wrapping capability, during standard mixing circle, the aggregate should be completely wrapped by asphalt; the asphalt temperature should be controlled in the scope of 150°C±5°C. The using asphalt is normal asphalt without any other additives.

Specifications of Cold Aggregate feed System

Motor Power of Belt feeder	Single- Silo Volume	Electric drum of material conveyor	Inclined belt Electric drum	Tier Type	Width of Inclined belt	Production capacity
2.2KW×4	4m3	3KW	2.2KW	900-20-14	500mm	80T/h

Specifications of primary screening system

Motor power	Mesh size	Capacity	Total Power
4kw	40mm×40mm	60~100t/h	4 kw

Specifications of drying and mixing drum

Drum size (m)	Drive form	Reducer power	Capacity	Tire Type	Pneumatic brake	Drying and mixing drum installation angle
φ1.5 × 6.5	Friction wheel drive	5.5kW×4	80T/h	900-20-14	1 set	3°