Home  >  Construction Machinery  >  Engineering & Construction Machinery  >  Pile Driver

1.hydraulic piling machine, 2.no noise,no vibration,no pollution, 3.suitable pile: 250-450mm, 4.High pile driving speed - details see: https://www.machineto.com/piling-equipment-concrete-pile-driving-machine-10113323

Main Introduction for Hydrostatic Press Pile driver:

1. The working principle is using hydraulic pressure to clamp precasted pile, H shape or other shape steel pile, driving the pile into ground by hydraulic pressing.
2. Suitable for piling precasted round & square concrete pile, H shape steel pile and other irregular shaped pile in clay, soft soil and sandy ground.
3.Has characteristics of no noise, no vibration, no pollution, clear ground with high speed of pile driving, reliable construction quality and environmental protection, high efficiency, energy saving.

"New Timehope" Hydrostatic Press Pile drivers are self-developed and with 5 up-to-date national patents:
1. Flexible connection technology
Novel flexible connection technology of central axis, won national practical patent No. 200820158613.8.

2. Multi-functional piling technology. Original combination clamping piling and top piling won invention patent No. ZL02139875.5

3. Inverted cylinder technology.

Structure design of 4 lifting inverted cylinders change strained condition of cylinder and increases the service life of cylinders,

won national practical patent No. ZL01249443.7.

4. Integrative side and corner piling technology
Particular side and corner piling mechanism increasing the capability of side & corner piling,won national practical patent No. 200820158615.7.

5. Self-adaptive clamping mechanism

Original self-adaptive clamping mechanism won national practical patent No. 200820158614.2.

Main technical parameters forZYC240B-B hydraulic static press pile driver

Rated piling pressure (tf)	240	Suitable pile & specification (mm)		F: 300-450 R:300-450
Max. Piling speed (m/min)	7.5	Max. Crane lifting weight (t)		12
Piling stroke (m)	1.8	Hanging pile length (m)		14
Max. Longitudinal pace (m)	3.3	Minimum side piling space (mm)		1200
Max. Transverse pace (m)	0.6	Minimum corner piling space (mm)		2400
Max. Rise stroke (m)	1.0	Rated hydraulic system pressure (mpa)		23(20)
Angle range (°)	15°	Total weight (t)	Machine weight	92±2
Intensity of pressure (tf/m²)	9.9/10.1		Counter weight	125
Hydraulic Pump (Unit × Ml/Turn)	2×63+1×80		Water weight	24
Motor power (Unit × kw)	2×22+1×30		Total weight≥	240

Unique features of "New Timehope" hydrostatic pile driver:

1. The supporting points of derricking cylinders are set at the two sides of crane arm. Increasing the stability and safety of crane arm

2. Lengthen the first arm of crane and increase the stability and safety of the crane.

3. Hydraulic systems for crane and piling mechanism are interflow, the crane pump can be used for pile driving while the crane is not working, which speed up driving pile.

4.Hydraulic systems of crane applies speed adjusting system that speed of each component can be adjusted freely during operation. Safe, stable and reliable.

5. A shutoff valve is assembled at high press tube of the leg cylinders and pile driving cylinders. Turn off the valve before knocking down, and then disassemble the connecter to avoid the waste of hydraulic oil and save pile machine moving and reparation cost for customer.

6. Using high pressing plastic pipe to replace steel pipe for the hydraulic tube. The bearing force is larger than the steel pipe and the cost is 3 times higher. It is convenient to repair and maintain by using plastic pipe with high reliability.

7. Piling and clamping hydraulic control system applies remote control system, which greatly improves the positioning precision and clamping reliability of the pile, effectively avoid the damages to the pile in construction due to pile clamping force overlarge.

8. Weight beam is one-piece plate bending forming, not allowed to be welded, which assures its strength.

9. Motor system is changed from past horizontal type to vertical type. Oil pumps are easily repaired. The system is easily ventilated and cooled.

10.The central axis and short boat are connected by a floating and flexible connection mechanism (two layer boards are used underside of the central axis). Effectively improved the stress condition of central axis and machine body. Easily assembled and disassembled. Central axis, rotary platform and short boat are of two layers structure and connected with the main body.

We are looking forward to hearing from you.

Thanks and best regards