Home  >  Industrial Supplies  >  Filter Supplies  >  Other Filter Supplies

Continuously Efficient, in Liquid Separation, and Particle Removal for Improved Fluid, Better Quality and, Value Low Cost - details see: https://www.machineto.com/pall-aquasep-plus-l-l-coalescer-filter-elements-10219727

Liquid/ Liquid Coalescer Elements
Stage 1: Prefiltration
Due to the fine pore structure of this coalescer medium,
Pall recommends that a prefilter be installed upstream

of the coalescer assembly to properly control
particulate matter in the liquid stream. Installing a
prefilter significantly extends the life of the coalescer
and reduces particulate concentration in the filter
effluent to meet solids specifications.
To maximize the service life of AquaSep Plus
coalescers, each coalescer is constructed with an
integral prefilter.
Stage 2: Coalescence
The hydrocarbon and water mixture enters the coalescing
element and flows inside to outside (see Figure 1). This is
where small droplets of dispersed phase liquid come
together, or coalesce, as the mixture moves through the
depth of Palls specially formulated coalescer medium.

Stage 3: Separation
In separating water from fuel, water-free fuel and large
water droplets flow toward the separator located directly
below the coalescer stage. Flow is outside to inside (see
Figure 1). The separator medium is hydrophobic, which
prevents water from entering the separator. Only water-
free fuel flows through the separator . Water and fuel are
removed by separate drain connections.
In separating oil from water, a settling zone is designed
downstream of the coalescer. In the settling zone, the
large coalescer droplets are separated due to gravity
(see Figure 2).

Benefits
Continuously Efficient in Liquid Separation and
Particle Removal for Improved Fluid Quality and Value
The effective liquid separation and the particulate
removal abilities of the AquaSep Plus coalescer system
significantly reduces off-spec product incidents, thereby
saving reprocessing and transportation costs.
Low Cost Liquid Separation and Solids Removal
Due to AquaSep Plus coalescers longer life and superior
liquid separation efficiency, the overall cost of liquid
separation is low especially when compared to other less
efficient methods. The integral prefilter within the AquaSep
Plus coalescer maximizes element service life.
Does Not Disarm; Increases Service Life
Palls specially formulated medium coalescer contains
no glass fiber and does not disarm in the presence of
surfactants. This results in longer service life than
conventional coalescers. The prefilter stage removes
particulates and also extends the filter service life.
High Performance Design Results in
Smaller Assembly Size
The high performance AquaSep Plus coalescer stack
design promotes an even flow distribution permitting a
high rate of flow. As a result, fewer coalescer cartridges
are required to efficiently remove water from fuel. This
results in a small economic assembly size.

Ordering Information
LCS2B1AH