Paint over spray extractor

High efficiency filtration by sinter plate filter, for paint over spraying No changing filter ,No waste water to treatment - details see: https://www.machineto.com/paint-over-spray-extractor-10225328

Condition:New	Type:Fabric Dust Collector	Efficiency:>99%	Minimum Particle Size:0.5 micron
Place of Origin:Samut Prakan Thailand	Brand Name:R.C. Trading & Engineering	Model Number:RC Compact Delta2 750/9	Dimension(LWH):1500x1000x2000
Weight:500	Certification:DIN, ISO, EN	Compact:high efficiency filtration

contact supplier for Paint over spray extractor

Air pollution from paint spraying with water or solvent base

In past all paint spraying alwayspurifiedby“wetscrubber or activated carbon absorber”

"Wet scrubber"Old methods to purify this over spraying andodour makes many affected problems muchmore than intention to get rid of overspray andodour . These old methods make much wastewater especially the TDS (Total Dissolved Solid)there are many solid from overspray becompounded and some dissolved in the waterand reduced BOD ( Biological Oxygen Demand)by some chemicals that need to control muchand so expensive. "Activated carbon"of course the activated absorbents such asactivated carbon can absorb odour but foroverspray would blind on the micro pore ofabsorbent material and make it degeneratedand get plugged , affect to lower flow rate anddown the suction system very quickly

Our Hight efficiency over spraying dust collector

• emission reduction of dry / liquid aerosolsdownto 0,1 mg/m³

very high efficiency filtration by sinter plate filter

•protection of down stream systems forthermaland/oradsorptiveVOC removal

•high air circulation achievable at automatedapplications (reduction of fresh airration

< 20%)

•internal circulation of pre-coat materialexternal waste treatment of saturated

material

•no waste water

•no chemicals for pacifying,disinfectionandcoagulation

•Cheep cost of pre-coating material

•No toxic chemical

•Low cost of maintenances

Paintingdust application

•Filterunitforfrom1000-100,000m³/hormodularset

•automatedsender-andreceiverunit

•Pressurizedpaintapplicationbycompressedairgun

•PLCmastercontrol

RC Compact model :

MODEL	AIR FLOW RATE	ONEOPEN SIDE SPRAYBOOTH FACE AREA	BLOWER POWER	DIMENSION
	(CMH)	( WxH=SQ.M)	(KW)	(MM)
RCCompact-Delta2-2-750/9	300	(WxH) =0.25	2.2	1000X1500X2000
RCCompact-Delta2-4-750/9	300-600	(WxH) =0.5	2.2	1000X1500X2000
RCCompact-Delta2-6-750/9	600-900	(WxH) =0.75	2.2	1000X1500X2000
RCCompact-Delta2-8-750/9	900-1200	(WxH) =1.0	4.1	1000X1500X2000
RCCompact-Delta2-10-750/9	1200-1500	(WxH) =1.25	4.1	1000X1500X2000

RC-WP model

MODEL	AIR FLOW RATE	ONEOPEN SIDE SPRAYBOOTH FACE AREA	BLOWER POWER	DIMENSION
	(CMH)	(H x W=SQ.M)	(KW)	(MM)
RC-WP-HSL-4-900/18	850-1500	1x1=1	2.2	900X1500X3900
RC-WP-HSL-6-900/18	1500-2500	2x1=2	4.1	900X1500X3900
RC-WP-HSL-8-900/18	2500-3500	2x2=4	5.5	900X1500X3900
RC-WP-HSL-10-900/18	3500-4500	2x3=6	7.5	900X1500X3900
RC-WP-HSL-12-900/18	4500-5000	2x4=8	11	900X1500X3900