Home  >  Industrial Supplies  >  Industrial Filtration Equipment  >  Machine Oil Filter

ORS endesigned for the regeneration of various used engine oil,used lubricant ,Can also processing other types of mineral use - details see: https://www.machineto.com/ors-1-waste-engine-oil-regeneration-system-10227494

This ORSused engine oil recycling regeneration plant:

The features of engine oil recycing machine:

1.The latest technology to change traditional slow and low efficient problems

2. Efficient recovery,resumption of oil color and processing phisical and chemical efficiency.

3.suitable to handle many kinds of miniral oil

4.eliminate electric charge between polar particulate in waste oil

5.remove halmful gas,filtration and water content, clean waste gas

items	ORS-1	ORS-2	ORS-3	ORS-4
capacity(Kg/d)	3000	5000	8000	12000
Recovery rate(%)	70-95%	70-95%	70-95%	70-95%
Working pressue(Mpa)	≤0.4-0.6	≤0.4-0.6	≤0.4-0.6	≤0.4-0.6
Vacuum degree(Mpa)	-0.06~-0.095	-0.06~-0.095	-0.06~-0.095	-0.06~-0.095
Heating oil temperature(°C)	200°C	200°C	200°C	200°C
Oil temperature(°C)	120°C	120°C	120°C	120°C

Application of ORS engine oil recycling machine:

ORS series waste engine oil recycling and purification plant can not only remove the carbon particles, deep oxide, etc., but also can filter off the harmful matters such as colloid, bitumen. After treated by the plant, the color of the treated oils can be recovered, similar with new one; the quality indexes are improved also, so as to resume the performance of engine oil, keep the engine being lubricated, guarantee lubricating system of engine to work properly and prolong service life of engine oil. The series plant are special for recycling all kinds of engine/motor oil used in ships, cars, trucks, buses and other vehicles.

Working Principle of engine oil purification machine
After the contaminated oil is pumped into the oil reactor, certain amounts of flocculation additives are added into the reactor(s) to flocculate the polar particles into large ones, which will be filtered off by physical and chemical methods. The gas will be removed by gas trap and vacuum tank under the function of degassing and dewatering. Then, the oil passes through the high precision filter to filter off impurities, getting purified oil similar with new one.

Main Structure of engine oil purification machine
The machine of ORS includes following systems: waste oil inputting system (inputting oil pump, oil inlet and outlet valves), heating system (reactor, stirrer, heater, heat exchanger etc.), vacuum purifying system (vacuum pump, cooler etc.), filtering system (oil pump, strainer, removing impurities tank etc.) and electric control system. Especially, the strainer is designed to remove impurities by manual or automatic method.

Below is the pictures of engine oil before and after treatment: