Mini Pleat Type for Cleanroom Hepa Filter

Hepa Filter
1. Low resistance Hepa filter
2. Light weight Hepa filter
3. With Japanese standard level Hepa filter

Kowa Series HEPA Air Filter Performance:

Application Area:

Kowa Series HEPA filter:

Clean rooms for micro component electronic manufacture & assembly

Food processing industry.

Pharmaceutical Processing

Aerospace Engineering

Genetic & Biological research

Biohazard Atmosphere

Laminar Flow Workstations

Bio Safe Hoods(Biological Safety Cabinets)

Hospital Operating Theaters & Intensive care units

Atomic Research

Pre filter stage to ULPA systems

Kowa Series HEPA Filter Characteristics:

1. Kowa Series HEPA filter is the finally filtration in clean room that use for filter the particles more than 0.3um.

2: The filter media adopts the ultra-thin glass fiber, the hot-melt glue spacing each pleats in regular so that achieve high dust volume. All of the media area can be used completely .

3: The anodized aluminum frame so that it is anticorrosion for long time.

4: The sealant around the media so that the air filter is without any air leaking

5: The both sides of air filter are metal screens with power coated so that the media is without any damage.

6: Laser to scan each air filter one by one-Hepa filter.

7: Kowa series HEPA filter efficiency range: H10, H11, H13, H14 95%-99.99995%(EN1822).

8. Each air filter accompanies a test report.

9. Sizes available 2'x2' + 2'x4' or Customized Sizes Are Available On Request; Filtration Rating: 0. 3 Micron & More Frame Material: SS 304/GI (Galvanized Steel)/Aluminum. Filtration Efficiency: 90 –99. 9 % Filter Media: Glass Fiber Media / Spun Bonded Polyester Media.

10. Mini-Pleat filters construction shell has extruded anodized aluminum profiles.The Mini-Pleat Panel filters are provided an expanded metal mesh, face guards on downstream sides and upstream sides.

Description :

•Application: Final or return filtration for clean rooms- Laminar air flow for clean benches

•Type: High efficiency filter panel

•Case: Extruded and anodizedaluminum.

•Media: Micro-FIBRE GLASS

•Separator: Hot-melt beads.

•Sealant: Polyurethane

•Gasket: Neoprene Rubber

•Faceguard Expanded metal on both side, powder coated

•EN 1822 efficiency: H13 / H14

•MPPS efficiency: H13:>99.95%, H14:> 99.995%.

•Final pressure drop 400 Pa Recommended, 600 (Maximum)

•Temperature: 70°C maximum in continuous service.

•Humidity 100% RH

•Low initial pressure drop

•Resilient

•Wide range of Standard Size

•Double faceguard

•100% Individually tested according to EN 1822

Guaranteed performance

11. Approvals :

12. Project Reference :

Production Equipment

Production Equipment and Facilities

Aluminium Separator Manufacturing

Testing Equipment

Cleanroom Manufacturing Environment

Mini Pleat Manufacturing