Mini Electric Wire Rope Hoist

Mini Electric Wire Rope Hoist

Mini Electric Wire Rope Hoist

1.MD1 Model wire-rope electric hoists can be widely used to hoist heavy objects, or installed on the straight or curve I-steel beam of Single-girder Cranes. They can also be used together with Electric Hoist Double-beam, gantry crane and slewing cranes.

2. MD1 Model is widely used in factories,mines,harbors,warehouse,cargo, storage areas and shops,essential in raising working efficiency and improving working conditions.

Difference:

MD1 Model electric hoists have fast and slow lifting speeds which make it lift steadily and accurately.

Safety

1. Brake and clutch ensure the safety under any circumstance,no slip under load

2. IP55 of hoist frame and brake ensures the optimal corrosion resistance under harsh environment.
3. Up and down limit switch ensures the safe operation of the hook on the top and bottom position.
4. Low voltage contactor ensures the safe and reliable operation

Features

1) Compact structure and reasonable design
2) Easy to install and high efficiency
3) Widely used
4) Top quality with competitive and economic price

Small size, beautiful appearance, reasonable structure, strong and durable, easy to store

Motor: Hoist Motor is a taper type rotor motor with braking, it is made by Nanjing special motor factory, it is of the best quality motors, it has bigger torque, so it can be adapted to moving frequently, the Maximum torque is 2.4-3 times than the rated torque.

Gear Box: Hoist Gear Box has specially treated gears for high wear resistance. Each Geared Shaft assembly is supported on ball or roller bearings, to ensure smooth, low-friction operation.

Wire Rope: Hoisting ropes comply with the exporting standards. The leading rope taken by the Drum does not slip sideways when slack. The factor of safety, on the nominal breaking strength of the rope is six.

Rope Drum: Grooved Drum, seamless pipe of adequate length to be wounded in one layer and to provide proper support for the rope to minimize abrasive wear is provided. Drum Shaft resolves on Ball Bearings for ensuring smooth running.

Electric apparatus controlling system: Model CD1 and MD1 is composed of the contactor box, controlling switch, cut-off limiter, the working voltage of controlling switch is 380V,36V or 24V(safety voltage).

Rope Guide: Rope Guide is in two halves, ensuring easy accessibility. It encircles the Drum completely so that the rope may not uncoil even when the Hoist is in unloaded condition. The rope guides of our company is thickened and dilated, so that it is not easy to be damaged.

Hook:The Hook Block is tested to 150 % of full load before assembly. The rope sheaves are fully guarded with protective steel casting. All sheaves rotate on ball bearing the pulley is thicken and dilated than domestic common pulley.

Technical Support:

HY crane group has established cooperation with scientific and technical institutions such as Beijing Materials Handing Research Institute, Shanghai Shenggang Machinery Design Institute, Longlinbao Design Institute, Wuhan Changjiang Ship Design Institute and University of Shanghai For Science and Technology,providing strong technical support for the sustainable development of the enterprise. Rapid rising of HYcrane has attracted attentions of authorities in the field .Liu Weiyan, a famous crane expert in China praise that “ The height of the starting point and speed of development of HYcrane Group is unprecedented in Chinese crane industry.

After-sales service: