Home  >  Industrial Supplies  >  Refrigeration & Heat Exchange Equipment  >  Heat Exchanger

1.Micro Channel Heat Exchanger, 2.Thickness: reach to 12mm, 16mm, 20mm, 25.4mm, 32mm, 36mm., 3.Lower weight-more compact design - details see: https://www.machineto.com/micro-channel-heat-exchanger-10241812

Shanghai Shenglin provides customers with high-quality and high-effect products(such as based on advanced production technologies, mature manufacturing processes

and strict quality controls and keep communicating with and understanding customers demands, which repays us with

self improvements and the trust and recognition of customers.

we are 'Detail Oriented, Focus on Quality, Never Cut Corners'.

We are a professionalheat exchanger, condenser, evaporator and heat pumpmanufacturer in China.

Our products have been exported toEurope,USA, Japan and Middle eastetc.

1. Braze welding vs expanded tube joint
2. Metallic bonding between Micro channel tubes and fin.
3. Off the shell high performing split a/c system was examined in ARI conditions A,B and C with two condensers: microchannel flat plate fin.
4. Condenses had the same volume, face, and air side area.
5. Microchannel condenser performed better and consequently system performed better.
6. Average increase in capacity is 4% and in COP IS 17% simuitaneously.
7. Charge reduction is 19% for the condenser and 9% for the system.
8. The MCHX has better corrosion resistance
9. The MCHX is built to last
10. Area available for heat transfer in microchannel HX

1. High Efficiency

Averagely 30% higher heat exchange performance

Averagely 20% lower air side pressure drop

AC unit COP highly increased

2. High Reliability

Sustainable high efficiency as metallic bonding

More adapt to pressure system s micro channel deign

Better corrosion resistance as alloy design

3. Environment Friendly

Averagely 30% les refrigerant charge

Easier to recycle as all aluminum design

4. Total Cost Reduction

Smaller size, less weigh less part

Less refrigerant charge

Easy handle

Cost efficient –less refrigerant charge

Item	Evaporator Type	Operation medium	Operation pressure (MPa)	Application
1	Φ16/Φ9.52/Φ12.7 Copper tube with aluminium fin	Cold/hot water	≤1.6	Used for combined air handling unit, fan coil etc air conditioning devices
2	Φ18/Φ20 Steel pipe winding with steel sheet	Steam	≤0.2	Used for combined air handling unit, fan coil etc air conditioning devices
3	Φ16/Φ9.52/Φ12.7 Copper tube with aluminium fin	Brine	≤1.6	Used for heat transfer in cold storage and all kinds of low temperature systems
4	Φ9.52/Φ7.94/Φ7 Copper tube with aluminium fin	Ethylene glycol	≤1.6	Used of energy recovery and low temperature system devices
5	Φ16 Copper tube with aluminium fin	Ice mud	≤1.6	Used for dry operation condition, fresh air dehumidification etc systems
6	Φ9.52/Φ7.94/Φ7 Copper tube with aluminium fin	R22	≤1.9	Used for industry and commerce air conditioning system
7	Φ9.52/Φ7.94/Φ7 Copper tube with aluminium fin	R407C	≤1.9	Used for industry and commerce air conditioning system
8	Φ9.52/Φ7.94/Φ7 Copper tube with aluminium fin	R134a	≤3.1	Used for vehicle and vessel etc transportation devices

For further information please contact me.

Ms. Suzy Yin

Tel: +86 21 35324169-210

Mob: +86 18321796480

Skype: sales4shenglintec.com