Home  >  Apparel & Textile Machinery  >  Cap Making Machine Parts

Medical titanium bar and alloy rod are available., material:GR1,GR2,GR3,GR4,GR5,GR7,GR11, Size: OD10.0-200 *Length 6000mm - details see: https://www.machineto.com/medical-titanium-bar-d16-5mm-10259035

Medical titanium bar specifications:

Titanium bars and rods

Titanium bars can even meet the requirements of ASTM F136 and F167,etc.Their permissible variations in size can also meet the requirements of H9.Billets and bars are forged by the 2000t Hydraulic Forging Press and followed by rolled and swaged.Finished bars are subject to 100% ultrasonic testing.

1)titanium bar and titanium alloy rod are available.
2)material:GR1,GR2,GR3,GR4,GR5,GR7,GR11

3)specication:ASTM B348, ASTM F67, ASTM F136, AMS4928, ASTM F1295, MIL-T-9046G GB/T3620.1 ASTM4928

4)Size: OD5.0-200 *Length 6000mm

5)Condition: M

6)Application: Medical, Aviation, Military, Petrochemical Engineering, Metallurgy, Salt-making, Textile, Sports and so on.

Our market is very aggressive.

5-10days delivery is guaranteed.

We welcome orders for as few as 10 kilograms

Management conception ,customer first,service foremost

We are the leading titanium products suppliers in Baoji,the titanium resource in the word .Our titanium products are very authoritive and have been widely used in our country and foreign countries ,like Europe and the United States ,Korea and Japan.

Welcome your inquiry for more details

Titanium diameter and diameter allowable deviation

Titanium bar

Product	Size(mm)	Grade	Specification
Titanium Bars	Φ5mm~300mm Length≤3600mm	Gr1 Gr2 Gr3 Gr4	ASTM B338,F67
		Gr7 Gr11 Gr12	ASTM B348, F136 ,ASME SB348
		Gr5	ASTM B348,F136 ASME SB348,AMS 4928

Diameter	Diameter allowable deviation	Round,not more than
6.35~7.94	±0.12	0.20
>7.94~11.11	±0.15	0.23
>11.11~15.88	±0.17	0.25
>15.88~22.23	±0.20	0.30
>22.23~25.40	±0.22	0.33
>25.40~28.58	±0.25	0.38
>28.58~31.75	±0.27	0.40
>31.75~34.93	±0.30	0.45
>34.93~38.10	±0.35	0.53
>38.10~50.80	±0.39	0.58
>50.80~63.50	+0.79,0	0.58
>63.50~88.90	+1.19,0	0.88
>88.90~114.30	+1.58,0	1.16

The chemical composition of the bar:

Grade	Impurities ,not more than,%
	Ti (The lowest content)	Fe	C	N	H	O	Residual elements
							single	total
Gr1	99.1	0.20	0.08	0.03	0.010	0.18	0.10	0.40
Gr2	98.93	0.30	0.08	0.03	0.010	0.25	0.10	0.40
Gr3	98.81	0.30	0.08	0.05	0.010	0.35	0.10	0.40
Gr4	98.56	0.50	0.08	0.05	0.010	0.40	0.10	0.40
Residual elements should be include Al,V,Sn,Mo,Zr,Ni,Cu,Si,etc.

Tensil Test
Requirement MIN	Tensile Strength	Yield Strength 0.2%	Elongation	Reduction of Area
	[Mpa]	[Mpa]	[%]	[%]
	895MIN	828MIN	10MIN	25 MIN
Result	1010	905	14	37