MD1 Electric Lifting Wire Rpe Hoist Electric (2Ton Capacity 6M Lifting)

lifting weight capacity 0.5t to 10t, lifting height from 3m to 30m, single lifting speed 8M/Min, oem odm factory direct sale - details see: https://www.machineto.com/md1-electric-lifting-wire-rpe-hoist-electric-2ton-capacity-6m-lifting-10097105

Condition:New	Place of Origin:Hebei China (Mainland)	Brand Name:QIANLI	Model Number:MD1
Usage:Construction Hoist	Power Source:Electric	Sling Type:Wire Rope	Maximum Lifting Weight:10t
Maximum Lifting Height:30M	Lift Speed:8 M/min	Warranty:1 year/12 month,12 month	electric hoist:Electric Lifting Wire Rpe Hoist Electric (2T Capacity 6M Lifting)
capacity:2ton	standard lifting:0.8M/8M/min	lifting height:6-30M	running speed:20m/min
wire rope type:6*37-11-155	i beam track type:20a-32c	running motor:380v 50hz

Model CD1 Electric Wire rope Hoist has only one normal speed,which can satisfy normal application.Model MD1 Electric Wire rope Hoist provides two speeds: normal speed and low speed. At a low speed,it can do precise loading and unloading, mounding of sand box, maintenance of machine tools,etc.

MD1 wire rope electric hoist feature

1. special drive composition method,

2. reducer use planetary speed-down drive,

3. unique column rotor-taper breaking wheel motor with low yawp,

4. advanced guide rope technology,

5. high precision and super mechanical spin limiter,

6. high quality control electric component with low malfunction.

Advantages of MD1 wire rope electric hoist

1.Cd1 axial dimension of hoist is compact ,it is easy to close the wall and lifting more height in a certain height.

The size of rail bottom base to hook is smallest compare with CD1 hoist , it makes the possible to lower the height of construction.

2. light self-weight ,light wheel pressure. It reduce the pressure of girder ,raise the Safety coefficient of girder.

Basic parameter of our wire rope electric hoist

Model	0.25TON	0.5TON	1TON	2TON	3TON	5TON	10TON
Capacity ton	0.25	0.5	1	2	3	5	10
Standard lift m	3-9	6-12	6-30	6-30	6-30	6-30	6-30
Lifting Height m/min	88/0.8	88/0.8	88/0.8	88/0.8	88/0.8	88/0.8	77/0.7
Running Speed m/min	20/30
Wire Rope type	6*19-3.6	6*37-4.8-180	6*37-7.4-180	6*37-11-155	6*37-13-170	6*37-15-200	6*37-15-200
I beam track type	16-22b	16-28b	16-28b	20a-32c	20a-32c	25a-63c	28a-63c
Loop track minimum Radius m	0.8	1.5	1.5-4	2-4	2-4	2.5-5	3.5-9
Voltage V	380	380	380	380	380	380	380
Frequency HZ	50	50	50	50	50	50	50
Phase	3	3	3	3	3	3	3

MD1 wire rope electric hoist components detailed introduction

Motor	Hoist Motor is a taper type rotor motor with braking; it is of the best quality motors, it has bigger torque, so it can be adapted to moving frequently, the Maximum torque is 2.4-3 times than the rated torque.
Gear Box	Hoist Gear Box has specially treated gears for high wear resistance. Each Geared Shaft assembly is supported on ball or roller bearings, to ensure smooth, low-friction operation.
Wire Rope	Hoisting rope comply with the exporting standards. The leading rope taken by the Drum does not slip sideways when slack. The factor of safety, on the nominal breaking strength of the rope is six.
Rope Drum	Grooved Drum, seamless pipe of adequate length to be wounded in one layer and to provide proper support for the rope to minimize abrasive wear is provided. Drum Shaft resolves on Ball Bearings for ensuring smooth running.
Electric apparatus controlling system	Model CD1 or MD1 is composed of the contactor box, controlling switch, cut-off limiter. The working voltage of controlling switch is 380V, 36V or 24V (safety voltage).
Rope Guide	Rope Guide is in two halves, ensuring easy accessibility. It encircles the Drum completely so that the rope may not uncoil even when the Hoist is in unloaded condition. The rope guides of our company is thicken and dilated, so that it is not easy to be damaged.
Hook	The hook block is tested to 150 % of full load before assembly. The rope sheaves are fully guarded with protective steel casting. All sheaves rotate on ball bearing. The pulley is thicken and dilated than domestic common

Application envirment of wire rope electric hoist

It is applicable in the temperature of -20°C~+40°C, Humidity≤85%, Altitude below 1000m, no fire, no explosion and no corrosive. Power is 3-phase 380v 50HZ(also can be customized according to customer's requirements)

Precaution of wire rope electric hoist

1.Before you use the hoist,please do remember to check the hooks and bodies,the brake device and the lubrication of transmitting parts,and load chains in good condition as well as the die motions.
2.Dont use two or more hoists to lift one weight
3.Overload is strictly forbidden.
4.No hook tips loading.No direct binding of a load with one chain.
5.No over lifting,no over lowering.
6.Keep anybody out of the place undef the loading.

Pls let us know following about electric hoist

1. which type hoist is your wanted? Fixed or mobile one?

2. can we know your lifting weight and lifting height?

3. is that availeble to tell us your required power?

4. our hoist gennerally by sea shipping, your sea port is need to check a best shipping fee.

5. How about your quantity? if in large quantity, we will apply a best favorable price for help.

6. our payment is T/T or west union? which is avaible for you?

7. oem odm service is available for you, your brand LOGO can be made one hoist, besides, any other color is ok for you.

Our contact way

Beijing Tengli Hengxin Crane Machinery Co.Ltd

www.qzsb.cn www.tlhx.en.alibaba.com

Manager: April

cn100108286

this electric hoist lifting capactity is 0.5t to 30t, and wire rope length can be made from 3m to 30m and lifting speed can be 8m/min, we can say this cd1 is your best choice, if you like this one, not hesitation to contact me.

welcome your kindly inquiry at any time.