Home  >  Printing Machinery  >  Pre-Press Equipment

1.EA320 manual lifting pneumatic ink mixer, 2.Not heated with long time working, 3.printing ink, seed fat, colophony, asphalt - details see: https://www.machineto.com/manual-lifting-pneumatic-ink-mixer-10072724

Manual Lifting Pneumatic Ink Mixer

Description:

EA320 manual lifting pneumatic mixer is a horizontal plate moving up and down on two-pillar to complete lifing (column relative to sets of inside and outside to achieve lifting movement) ink mixer based on model EA320 single-pillar, dual-screw fixed (90 degrees back-end double top wire fixation). Air motor inlet controls the speed of air motor to control mixer’s speed.

Application range: Oil paint, printing ink, seed fat, colophony, asphalt, gooey, medicine liquid, motor oil, dope, coloring matter and so on .

Basic parameters:

Type:	EA320
Motor Type:	EMH010 (option according to viscosity and volume)
Rated Power:	0.1HP (option according to viscosity and volume)
Rated air pressure:	0.6 MP
Rated speed:	0-1100 switch (can be variable speed)
Rated torque:	0.64N.m
Rated Air Consumption:	180L/min
Mixer Paddle:	A~ S (option according to viscosity and volume)
Motor Weight	1.8kg
Shaft length:	320mm (option according to viscosity and volume)

Pneumatic motor features

1. Not heated with long time working, long performance life, explosion-proof, not effected by high temperature and shake.

2. Speed stepless adjustment; adjust air pressure to control the rotate speed.

3. Can be worked with full with lower temperature.

4. Load overweight or stuck when the motor does not heat damage, and can load start.

5. Humid or dusty places can still be used normally.

Optional air motor suggestions

The case of certain horsepower, torque, slow speed applications that require large load; torque is great for a small speed fast rotation.