machine candle multi-function automatic candle making machine

candle making machine, 1.Automatic making, 2.Back pressure function, 3.Using powder wax as material, 4.Multi-function - details see: https://www.machineto.com/machine-candle-multi-function-automatic-candle-making-machine-10329776

Place of Origin:Henan China (Mainland)	Brand Name:DITAI	Model Number:DT9018-XZHL	Outside dimension:10007501510mm
Weight:850kg	Volts:380v	Candle diameter:30-50mm	Candle height:12-50mm
Capacity:3000 piece/h	Heating power:1.5kw	Motor power:2.2kw	Nominal pressure:3T

machine candle multi-function automatic

candle making machine

1.Main Application of candle making machine

XZHL multi-functioncandle machinein change under the premise of mold can produce various specifications ofsmall column wax, wax cups, water floating ball wax, tea wax,etc., packing automatically finish pressing forming send out products. Has the function of back pressure.

The XZHL multi-functioncandle machineis suitable to produce all kinds of the tea candle, the floating candle, small column candle, cup candle and so on.In accordance of requirement of users, various kinds of Wax products can be made through pressing by changing different sizes of moulds and adjusting the length of two toggle arms (special attention: the length of two toggle arms should be the same).

2.More introduction of candle making machine

Operation of candle machineis driven by a motor mounted in the frame. The motor drives shaftⅠ through texropes and the shaft Ⅰdrives spindle through a two-stage cylindrical gear reducer. Through the toggles on eccentric discs mounted on its both ends, the spindle drives punch seat to slide on 4 vertical cell guides to complete the pressing. Spindle drives a little vertical shaft to roll with a pair of bevel gears, and the little vertical shaft provides the pillar of mould disc a intermittent movement through a geneva mechanism to meet the time required for the pressing. Spindle drive thefeeding horizontal shaft to roll through a pair of sprockets. Horizontal shaft drives feeding vertical shaft to roll through a pair of bevel gears. Vertical shaft drives switch-plate to push the wax powder in the hopper into the cavity of mould disc to perform thepressing forming, then, push the products on the conveyer belt with a material tamping rod on the punch seat and carry it into a product box.

3.Motor operating instructions of candle making machine

The candle machineadopts a380vthree-phase asynchronous motor. Switch is mounted on the starboard of the machine. Push the green button to start the motor and push the red button to stop it. A voltage regulator is mounted in the bottom left of the machine by which can control the heating temperature of the upper/lower punch and the saucer. (see electric principle in attached figure).

4.Technical parameterof candle making machine

Volts	380v
Weight	850kg
Capacity	3000 piece/h
Outside dimension	10007501510mm
Candle diameter	30-50mm
Candle height	12-50mm
Heating power	1.5kw
Motor power	2.2kw
Nominal pressure	3T